Решил попользовать в качестве телевизора LCD монитор Samsung. Теперь возникла заморочка с постоянным (периодическим) его засыпанием. С power management-ом я особо никогда не разбирался - уж подскажите как отключить этот режим.
acpi=off делал, /etc/console-tools/config правил (BLANK_TIME=0) все равно засыпает...
Энергосбережение монитора
- BNXVS
- Вопрос темы решён
-
-
В BIOSе?
-
В мануале к плате (Via Epia M10000) написано следующее:
ЦитатаACPI Function
Activate the ACPI (Advanced Configuration and Power Management)
Function. If your operating system is ACPI-aware (i.e. Windows 98/98SE/
ME/2000/XP) select Enabled. Settings: Enabled and Disabled
Где этот пункт - ХЗ. Его там просто нет.ЦитатаACPI Suspend Type
Set the power saving mode for ACPI function. Settings are:
S1(POS) S1/Power On Suspend (POS) is a low power state. In
this state, no system context (CPU or chipset) is lost
and hardware maintains all system context.
S3(STR) S3/Suspend To RAM (STR) is a power-down state. In
this state, power is supplied only to essential
components such as main memory and wakeup-
capable devices. The system context is saved to
main memory, and context is restored from the
memory when a “wakeup” event occurs.
S1 & S3 Depends on OS to select S1 or S3.
Выбирал и S3 и S1&S3 - результат тот же.ЦитатаVideo Off Option
Select whether or not to turn off the screen when system enters power saving
mode, ACPI OS such as Windows XP will override this option. Settings are:
Always On The screen is always on even when system
enters power saving mode.
Suspend -> Off The screen is turned off when system enters
power saving mode.
Опять же пробовал и так и этак. Все равно гаснет.ЦитатаRun VGABIOS if S3 Resume
Select whether to run VGA BIOS if resumed from S3 state. This is only
necessary for older VGA drivers, select Auto if in doubt. Settings: Auto, Yes
and No
На всякий случай менял и эту опцию...Есть еще
ЦитатаVGA Event
Decide whether or not the power management unit should monitor VGA
activities. Settings: Off and Onи
ЦитатаIRQs Activities
Press Enter to enter the sub-menu and the following screen appears:
Туда пока не лез. -
Блин задрал меня этот трабл. Уже что мог - все перебрал. Неужели нигде нет приличного мануала по Power management в Linux console ??? Желательно на русском. Выручайте братцы.
-
Hallo BNXVS
Попробуйsetterm -blank 0?
man setterm?
-
@Multi VDR - спасибо за подсказку.
Для отключения выключения монитора (О как ! ) сделал следующее:
В BIOS
ACPI Suspend Type - S1&S3
Video Off Option - Suspend -> Off
Run VGABIOS if S3 Resume - Auto
VGA Event - offВ скрипт /etc/init.d/runvdr
после:Цитатаif [ x$START_VDR == x"no" ]; then
exit 0
fi
добавил строки:Уже полчаса сижу жду - когда отключиться... Пока проносит.
-
@BNXVS
Посмотри Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу. , от мыши тоже можно избавится, если она тебе мешает.