VDR-news - только новости, без обсуждений

Цитата

Hi,

new versions of RSS reader plugin for both stable and developer VDR
series are now available:

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

2008-01-20: Version 1.1.3

- Added Italian translation (Thanks to Gringo).
- Updated "example/rssreader.conf".
- Added '-Wno-parentheses' to the compiler options.
- Mapped 'kInfo' as help key in setup menu.

2008-01-20: Version 1.0.3

- Added Italian translation (Thanks to Gringo).
- Updated "example/rssreader.conf".
- Added '-Wno-parentheses' to the compiler options.

Показать весь код

Цитата

Hi,

new versions of Soppalusikka skin plugin for both stable and developer
VDR series are now available:

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

2008-01-20: Version 1.1.4

- Added Italian translation (Thanks to Gringo).
- Added '-Wno-parentheses' to the compiler options.
- Mapped 'kInfo' as help key in setup menu.

2008-01-20: Version 1.0.6

- Added Italian translation (Thanks to Gringo).
- Added '-Wno-parentheses' to the compiler options.

Показать весь код

Цитата

Hi,

new versions of femon plugin for both stable and developer VDR series
are now available:

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

2008-01-20: Version 1.2.3

- Updated Italian translation (Thanks to Gringo).
- Added '-Wno-parentheses' to the compiler options.
- Mapped 'kInfo' as help key in setup menu.

2008-01-20: Version 1.1.5

- Updated Italian translation (Thanks to Gringo).
- Added '-Wno-parentheses' to the compiler options.

Показать весь код

Цитата

History:

18.01.2008: Version 0.8.7
- Several changes to the Nagra2 code including HW reg mapper, map cycle counts,
0501 AU, 0101 auxed map57, tableless map3e and new build system.
- Increased smartcard info buffer size.
- Fixed memcpy in Seca ECM/EMM processing.
- Fixed ExtAU to trigger on wrong key. Don't trigger on EMM keys.
- Fixed RotateBytes to be robust against bad input.
- Updated Makefile for HG.
- Updated italian, russian, finnish translations.
- The 0.8.x branch is now frozen, only bugfixes will be applied.

Показать весь код

Цитата

VDR developer version 1.5.14 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A 'diff' against the previous developer version is available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

The changes since version 1.5.13:

- Fixed the Play function in the pictures plugin.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Makefile of the skincurses plugin (thanks to Rolf Ahrenberg).
- The new option --localedir can be used to set the locale directory at runtime
(based on a patch from Stefan Huelswitt).
- Fixed finding new transponders (thanks to Winfried Kцhler).
- Implemented handling of DVB-S2 (thanks to Marco SchlьЯler and Reinhald Nissl
for a patch that was used to implement this). VDR now requires the "multiproto"
DVB driver, e.g. from Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
- Removed switching to the next higher or lower channel if the current channel
is not available, in order to allow staying on an encrypted channel that takes
a while for the CAM to start decrypting.

IMPORTANT NOTE:
===============

As of this version, VDR requires the new "multiproto" driver, as available,
for instance, from Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
It also uses additional transponder parameters, so a channels.conf file
written with this version will not work with previous versions of VDR.
Make sure you run this version in a separate environment, or make backups
of your config files in case you want to go back to the previous version!

So far, VDR supports DVB-S2 hardware and can tune to DVB-S2 transponders.
It doesn't yet handle H.264 video PIDs, so it should be safe to tune to
such a transponder even if you don't have a device that understands H.264.

I am using this version in my regular VDR (with a FF-DVB-S, Budget-DVB-S
and Budget-DVB-T card) and everything that used to work appears to still
work fine. I was also able to record the AC3 audio track from ProSiebenHD
with my TT-S2-3200 card and replay it on my FF-DVB-S card. I also successfully
tested recording encrypted DVB-S channels with the TT-S2-3200, so apparently
CAM handling also works with that card.

*When reporting problems, please don't reply to this message!*
Create a new thread instead, using a descriptive subject!

Have fun!

Klaus

Показать весь код

VDR developer version 1.5.15 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A 'diff' against the previous developer version is available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

NOTE:
=====

This is the final step towards a stable version 1.6.0.
Please report any bugs as soon as possible, so that I can prepare
a release candidate next weekend. If nothing unexpected happens,
I plan to release version 1.6.0 on March 2.

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

The changes since version 1.5.14:

- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added option -i to the pictures plugin's pic2mpg to ignore unknown file types.
- Revoked the switch to the "multiproto" driver in order to make a new stable
version before making this big switch and forcing all users to install a
driver that is not yet in the kernel source. The removed code will reappear
in version 1.7.0.
Note that you may need to switch back to an older version of your channels.conf
file if you have already used version 1.5.14, because it introduced new parameters.
- Added the new command line option --userdump to enable core dumps in case VDR
is run as root with option -u (thanks to Hans-Werner Hilse).
- Speeded up anti-aliased font rendering by caching the blend indexes (based on
a suggestion by Martin Wache).
- Fixed setting the OSD area in the pictures plugin.
- Ignoring "repeat" and "release" keys in the time search entry mode during replay,
to avoid inadvertently leaving it in case a key is pressed too long (suggested
by Andreas Brugger).
- Improved sending all frames to devices that can handle them in fast forward
trick speeds, including subtitles (thanks to Timo Eskola).
- The section handler is now stopped before the device is destroyed, to avoid
accessing file handles after they have become invalid (thanks to Reinhard
Nissl for reporting an invalid access when ending VDR, and to Deti Fliegl for
a patch that was used to implement StopSectionHandler()).
- Fixed setting the date in the channel display of the classic and sttng skins,
to avoid unnecessary OSD access (thanks to Marco SchlьЯler).
- The free disk space is now also displayed in the title of the "Recordings"
menu (suggested by Walter Koch).
- Changed the message "Upcoming VPS recording!" to "Upcoming recording!" because
it applies to non-VPS recordings as well.
- Fixed a loss of a timer's 'recording' flag after modifying it via MODT.
- Fixed detecting directories in cFileNameList::Load().
- Running the thread that removes deleted recordings at a low priority to (maybe)
avoid stuttering replay in case the thread is run during replay.
- Limiting the length of the recording name in timers in case VDR is run with
--vfat, in order to avoid names that are too long for Windows (suggested by Rolf
Ahrenberg).
- Using cString::sprintf() instead of asprintf() (thanks to Wolfgang Rohdewald
for pointing out a possible problem if the return value is not checked).
Plugin authors may want to consider doing the same. For convenience there is now
an additional version of cString::sprintf() that accepts a va_list parameter.
- When deleting the recording that is currently replayed, the replay is now
stopped immediately (thanks to Mikko Matilainen for reporting a possible crash
if the Info key is pressed after deleting the currently replayed recording).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- When determining the amount of free disk space, any deleted (but not yet removed)
recordings on different file systems (that are mounted under the video directory)
are no longer taken into account.
- When running out of disk space during a recording, only such deleted or old
recordings are removed, that actually are on the video directory file system(s).
This prevents VDR from accidentally deleting recordings on other file systems,
which would not add any free space to the video directory.
- Implemented the cStatus, cDevice and cPlayer functions for setting subtitle tracks
in plugins (thanks to Petri Hintukainen).
- Added cStatus::TimerChange() to inform plugins about changes to the list of timers
(based on a patch from Benedikt Elser).
- Added new cStatus functions to the 'status' plugin.
- Added missing #include <limits.h> to epg.c and menuitems.h (thanks to Ville Skyttд).
- The new function cSkin::SetScrollbar() can be implemented by skins to display
a scrollbar in every list menu. The 'classic' and 'sttng' skins have been
changed accordingly, as well as the 'skincurses' plugin.
- Introduced 'operator const void * ()' in cString to catch cases where operator*()
should be used.
- Fixed calculating the scrollbar sizes in the skins.

The changes regarding the handling of deleted recordings have not
been tested very intensely, yet. Please take a close look at the
modified code in

recording.c: AssertFreeDiskSpace()
cRecordings::TotalFileSizeMB()
tools.c: EntriesOnSameFileSystem()
videodir.c: IsOnVideoDirectoryFileSystem()

and report any obvious flaws.
It would also be great if somebody could actually run some tests
that verify the proper functionality of this new code.
Are there, maybe, any other places where IsOnVideoDirectoryFileSystem()
should be used?

*When reporting problems, please don't reply to this message!*
Create a new thread instead, using a descriptive subject!

Have fun!

Klaus

Цитата

VDR developer version 1.5.16 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A 'diff' against the previous developer version is available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

NOTE:
=====

This is the final step towards a stable version 1.6.0.
Please report any bugs as soon as possible.

If nothing unexpected happens, I plan to release version 1.6.0 on March 2.

The following translation files still have untranslated texts:

ca_ES.po
cs_CZ.po
el_GR.po
es_ES.po
fr_FR.po
hr_HR.po
nl_NL.po
nn_NO.po
pl_PL.po
pt_PT.po
ro_RO.po
sl_SI.po
sv_SE.po
tr_TR.po
uk_UA.po

It would be nice if somebody could finish these before the 1.6.0 release.
To avoid duplicate work, please announce your activity here in this thread.

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

The changes since version 1.5.15:

- Fixed setting the current subtitle track in Transfer-Mode (reported by Petri Helin,
thanks to Reinhard Nissl for pointing out that cDevice::Transferring() doesn't
return the right value in the early stage of channel switching).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Dutch OSD texts (thanks to Carel Willemse).
- Fixed various spelling errors and improved PLUGINS.html (thanks to Ville Skyttд).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed the format in cRemote::Put() to use "%016llX" instead of "%016LX" (thanks
to Ludwig Nussel for pointing this out).
- Revised the fix of calculating the scrollbar height in the skins. The scrollbar
handle now always has a height that is at least the width of the scrollbar.
- When switching the device that's used for live viewing away from the current
transponder in favor of an upcoming recording, an attempt is now made to stay
on the current channel by possibly going into 'Transfer Mode'.
- The CAM menu now stays open as long as it is automatically updated, even without
pressing a remote control key. This is important when updating the CAM firmware
from the transponder.
- No longer trying to switch to an available channel if the primary device has
no valid programme and a menu is open (avoids interference with the CAM in
case a CAM menu is open).
- Increased the valid range of the "Subtitle offset" setup option to -100...100
(thanks to Rolf Ahrenberg).
- Added the backslash ('\') to the list of characters that need to be escaped
when executing external commands (thanks to Peter Bieringer for reporting this one).

*When reporting problems, please don't reply to this message!*
Create a new thread instead, using a descriptive subject!

Have fun!

Klaus

Показать весь код

Цитата

VDR developer version 1.5.17 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A 'diff' against the previous developer version is available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

NOTE:
=====

The originally planned release of version 1.6.0 has been postponed,
because there have been a few small changes that need to be properly
tested first.
Please report any bugs as soon as possible.

If nothing unexpected happens, I plan to release version 1.6.0 on March 9.

The following translation files still have untranslated texts:

ca_ES.po
el_GR.po
es_ES.po
hr_HR.po
nn_NO.po
pl_PL.po
pt_PT.po
sv_SE.po
uk_UA.po

It would be nice if somebody could finish these before the 1.6.0 release.
To avoid duplicate work, please announce your activity here in this thread.

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

The changes since version 1.5.16:

- Updated the Swedish OSD texts (thanks to Tomas Berglund).
- Made the 'pic2mpg' script of the 'pictures' plugin work with uppercase filename
extensions and relative paths (thanks to Stefan Wagner for reporting this one).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Updated the Dutch OSD texts (thanks to Johan Schuring).
- Stripping control codes 0x86 and 0x87 from SI strings.
- Updated French language texts (thanks to Jean-Claude Repetto).
- Fixed handling 3 and 4 byte UTF-8 symbols in Utf8CharGet() (thanks to Andreas
Mair).
- Fixed a crash in cFreetypeFont::DrawText() if an unknown symbol is encountered
(thanks to Tobias Grimm). Unknown symbols are replaced with a '?'.
- Updated the Slovenian OSD texts (thanks to Matjaz Thaler).
- Updated the Czech OSD texts (thanks to Vladimнr Bбrta and Jiri Dobry).
- Updated the Turkish OSD texts (thanks to Oktay Yolgeзen).
- The 'plugins' target in the Makefile now returns an error exit code if one of the
plugins failed to compile (suggested by Tobias Grimm).
- Rendering the non-breaking space symbol as a blank (thanks to Tobias Grimm).
- Changed the default character set for SI data from ISO6937 (as required by the DVB
standard ETSI EN 300 468) to ISO-8859-9, in order to work around the stupidity of
some providers, who actually use ISO-8859-9, but fail to correctly announce that.

*When reporting problems, please don't reply to this message!*
Create a new thread instead, using a descriptive subject!

Have fun!

Klaus

Показать весь код

Новая Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу. стала поддерживать UTF-8. Разработчик ищет тестеров.

Больше Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу..

Цитата

Some unexpected work around the house has come up, so I won't be
able to release a new version of VDR today. Plus, there is still
the issue with live tv not kicking in after stopping a replay
with "Back" (which apparently bothers some users) and a problem
on systems with more than one CAM that can decrypt the same channel.
I want to fix these before version 1.6.0.

This gives translators a last chance to update the files

el_GR.po
hr_HR.po
nn_NO.po
pl_PL.po
pt_PT.po
sv_SE.po

It would be great if version 1.6.0 could have all languages
completely translated

Klaus

Показать весь код

Цитата

* Added scrollbar in menu lists when compiled with VDR >= v1.5.15.
* Fixed: VDR didn't responde anymore if the font used for lists was too small (<11px) and the marker in front of the active list item has been turned on.
* Added workaround to fix chrashes (hopefully) for VDR 1.4.x and patched fonts.
* Updated French translation (Submitted by Patrice Staudt).
* Updated Dutch translation (Submitted by Johan Schuring).
* Updated Spanish translation (Submitted by Bittor Corl).
* Updated Finnish translation (Submitted by Rolf Ahrenberg).
* Fixed crash in EPG details when using epgsearch if channel isn't found.
* Updated Italian translation (Provided by Gringo).
* Fix TrueTypeFonts support when compiled with VDR >= v1.5.4.
* Use WeekDayNameFull() in VDR >= v1.5.5.
* Use "Full Title Width" setting also for Tracks and Replay OSD.
* Optionally scroll current event's title and subtitle in channel info.
* New setup option "Show status symbols" (Suggested by chrisz @vdr-portal.de).
* Moved to the new i18n system introduced in VDR 1.5.7; fully backwards compatible due to Udo Richter's po2i18n.pl.
* Optionally show current WSS mode as symbol (if Avards is running).
* Draw "Dolby Digital" and "MONO" indicator in language flags.
* Hide inactive status symbols.
* Removed date from OSDs: tracks, volume
* Added status symbols in replay OSD.
* Draw line right to logos in Tracks and Replay OSD as it's done in other OSDs too.
* Added channel info OSD for "Info on channel switch = no" VDR option (Reported by Pat @vdr-portal.de).
* Removed compile time dependencies to plugin services.
* Renamed SKINENIGMA_HAVE_EPGSEARCH define to SKINENIGMA_USE_PLUGIN_EPGSEARCH.
* Added Turkish to translation array (for VDR >= v1.5.2).
* Use group name for logos even if channel logos are searched for by channel id.
* Fixed problems when compiling with VDR v1.5.7+ (Reported by Matthias Fechner).
* Fixed problems with certain images (Submitted by pinky666 @vdr-portal.de).
* Fixed crash if using display of repeatings in EPG details and reelchannelscan plugin is loaded.
* New setup option for location of messages in menu OSD.

Показать весь код

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

Цитата

Hi,

I'm pleased to announce a the maintenance release 0.8.2. You can
find it on my homepage as usual:

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

Excerpt from HISTORY:

2008-03-10: Version 0.8.2

- Fixed optional parameter processing for parameter -p. As
getopt() requires that optional arguments must follow the
option switch without any delimiters, I've updated MANUAL
accordingly, i. e. all options are documented without
delimiters. Furthermore you'll get an error message when
specifying the argument for -p incorrectly.
- Fixed compilation of patched xine-lib-1.1 (thanks to Darren
Salt and Fabian Foerg for contributing fixes for this issue).
- Provided xine_get_current_frame_alloc() to xine-lib which
allows retrieving the current frame image without the need
to pause the stream for a second call to the function after
allocating sufficient memory.
- Fixed retrieving only valid PTS from xine. xine's metronom is
now intercepted to monitor PTS changes after which PTS are
considered to be valid.
- Fixed handling VDR's clear command. Adding sync points to the
stream makes sure that all data on the way to xine up to sync
point gets properly dropped.
- Added Russian translation (thanks to Oleg Roitburd for
providing ru_RU.po).

Enjoy.

Bye.
--
Dipl.-Inform. (FH) Reinhard Nissl

Показать весь код

Цитата

VDR developer version 1.5.18 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A 'diff' against the previous developer version is available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

NOTE:
=====

The originally planned release of version 1.6.0 has been postponed,
because there have been a few small changes that need to be properly
tested first.
Please report any bugs as soon as possible.

If nothing unexpected happens, I plan to release version 1.6.0 on March 23.

The following translation files still have untranslated texts:

el_GR.po
hr_HR.po
nn_NO.po
pt_PT.po

It would be nice if somebody could finish these before the 1.6.0 release.
To avoid duplicate work, please announce your activity here in this thread.

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.

The changes since version 1.5.17:

- Added a missing reset of maxNumber in cChannels::Renumber() (reported by Sundararaj
Reel).
- Revoked the fixed change of the default character set for SI data and introduced
an environment variable to control it (thanks to Ales Jurik for reporting broken
SI data on the Czech/Slovak channels, which actually do follow the standard).
Users who want to set the default character set to something different can do this
by setting the environment variable VDR_CHARSET_OVERRIDE to something like
ISO-8859-9.
- Fixed a signed character used as index in cBase64Encoder::NextLine() (thanks
to Tobias Grimm).
- Updated the Spanish and Catalanian OSD texts (thanks to Luca Olivetti).
- Fixed automatically selecting the preferred subtitle language (based on a patch
from Rolf Ahrenberg).
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Updated the Polish OSD texts (thanks to Michael Rakowski).
- Fixed formatting the name section in the VDR man pages (thanks to Tobias Grimm).
- Updated the Swedish OSD texts (thanks to Magnus Andersson).
- Added Russian translations to the 'skincurses' and 'pictures' plugins (thanks
to Alexander Gross).
- Fixed displaying the free disk space when entering the recordings menu where the
last replayed recording was in a subdirectory, and pressing Back (thanks to Rolf
Ahrenberg).
- Fixed tuning to a live channel after a recording has been stopped using the
'Back' key.
- Resetting a timer's 'pending' flag when it has ended.

*When reporting problems, please don't reply to this message!*
Create a new thread instead, using a descriptive subject!

Have fun!

Klaus

Показать весь код

Цитата

VDR version 1.6.0 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A summary of all the major changes since the last stable version 1.4.7 can be found at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

A 'diff' against the previous developer version is available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

When updating from version 1.4.7 please make sure you read the INSTALL
and MANUAL files that come with the VDR source _before_ doing so!
Please make sure you have backup copies of all your configuration files,
and verify carefully that your timers will be set to the correct channels
after switching to this new version.

Thanks to the many people who have contributed in the making, testing and
debugging of this new version of VDR.

Have fun!

Klaus

Показать весь код

Цитата

Hi there,

streamdev-0.3.4 is finally available from Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
It marks the end of the 0.3.x series. As such, it still contains lots of
unused and legacy code. There has been a major cleanup in the meantime. Watch
out for the upcoming releases 0.4.0 (for VDR 1.4.0 - 1.5.8) and 0.5.0 (for VDR
> 1.5.9). Most of it has already been commited to CVS. Note that a branch has
been opened for the 0.4 series.

Special thanks go to:
- Sascha Volkenandt, the original author of streamdev
- Rolf Ahrenberg for many suggestions, patches and for helping a lot to
prepare the upcoming releases
- Petri Hintukainen for contributing the section streaming parts. Great work!
- all the others on the CONTRIBUTORS list

Please check Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу. for information on new
features. Additional information can be found in the README file and the
HISTORY log.

Enjoy,
Frank

Показать весь код