попробовал VO="mpegpes:card=`grep PrimaryDVB /etc/vdr/setup.conf | cut -d" " -f3`"
ничего не изменилось
кстати
arvdr:~# grep PrimaryDVB /etc/vdr/setup.conf | cut -d" " -f3
1
arvdr:~#
у меня стоит одна dvb карточка, поэтому данной проблемы быть не может.
и уж ели мы заговорили про этот нюанс с несколькими dvb карточками , то в версии конфига 0.8.6 (включена в arvdr)
про это ни слова
# Video out device
# most users will want the default of 'mpegpes', but users with a dxr3
# need to use 'dxr3'
#VO="dxr3" .tar.gz
VO="mpegpes"
а вот что говорит нам свежий конфиг версии 0.8.7
# Video out device
# most users will want the default of 'mpegpes', but users with a dxr3
# need to use 'dxr3', or users using softdevice might need 'dfbmga'
# If the DVB card with the MPEG decoder is not the first device as seen
# by the drivers/VDR, then you have to specify which card it actually is.
# Do so with 'mpegpes:card=X', where X is the card number (see also AO)
#VO="dxr3"
#VO="dfbmga" .tar.gz
#VO="mpegpes:card=1"
VO="mpegpes"
#VO="mpegpes:card=`grep PrimaryDVB /etc/vdr/setup.conf | cut -d" " -f3`"
но это так, к слову.
к моей проблеме это не имеет никакого отношения.
вы заметили из предыдущих логов, что с опцией mplayer -vo null все работает нормально ?