Allrussian Board Русскоязычный форум в Германии

Цитата

History:

10.11.2007: Version 0.8.5
- Added new Nagra2 0501 AU sheme.
- Added Nagra2 NA 'temporarily' fixes.
- For simplicity the high provider id is used always now, when loading an EEP
file in Nagra2 emu. e.g. for provider 0901 you have to rename the file to
EEP09_102.bin.
- Added an option to start AutoUpdate even if no audio/video pids are set (e.g.
EPG scan). Has to be enabled from the plugin setup menu.
- Fixed cardclient camd35 EMM request length check.
- Fixed smartcard Viaccess ATR check and transcription errors in smartcard NDS
camcrypt. Thanks to dr.aus.
- Fixed saving ScCaps to config if all cards are disabled.
- Fixed sasc-ng compile (FFdecsa dir).
- Obmit error messages about (optional) config files (e.g. *.KID).
- Added some glue for gcc 2.95 compile.
- Added Hungarian translations.

Цитата

VDR developer version 1.5.12 is now available at

ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.12.tar.bz2

A 'diff' against the previous developer version is available at

ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.11-1.5.12.diff


WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.


The changes since version 1.5.11:

- Fixed assembling PS1 packets in cTS2PES::instant_repack() (thanks to Reinhard
Nissl).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Fixed handling small PES packets that caused subtitles to be displayed late
in live mode (based on a patch from Reinhard Nissl).
- Fixed stopping live subtitles when a player is attached to the device.
- Fixed suddenly stopping subtitles in live mode.

Цитата

A new version of the plugin is available, which has been upgraded to
compile under VDR 1.4.7 and later. Thanks to all, who have provided
ideas and patches.

Download: http://www.heiligenmann.de/vdr/download/
Filename: vdr-vcd-0.8.tgz
Filesize: 40116

Цитата

In this thread I would like to announce a plugin that I developed for our beloved software.
The name is chanman (Channel Manager). I started to develop this plugin on September 2007, and I worked on it until now with the advice and suggestions by italian vdr-community.

The last version is 0.0.5.

This Plugin is useful to change channel with a multi level choice.

In particular is possible to select in the first choice by:

1) Group (indicate by the row with ":" in channels.conf) (Red key);
2) Provider (Green key);
3) Name (Yellow key);
4) Source (Hotbird/Astra/etc) + Provider (Green key);
5) Source + Name (Yellow key).

Then in a second Menu' we change the channel...

In order to see only radio, or free tv, or Crypted tv we use the Blu key. This filtration is applied on the active ordering (1-5).

The '0' key is activated with useful jump (especially for 4-5 sorting).

It is possible to download this plugin
http://ww2.unime.it/algebra/rinaldo/vdr/vdrplug.html

If this site does not work (sometimes happen!), go to the resources of vdr-italian forum:
http://vdrbox.altervista.org/risorse/

then click on "VDR-plugins"
and then
Download
"vdr-chanman-0.0.5"

P.S.

All my work is inspired or copied and modified by the source present in "menu.c". I tried to respect the "Klaus" philosophy, even if this is my first experience in c++ programming: Suggestion and advice are welcome!

Many Thank Klaus for your very nice work!

Цитата

HISTORY:

21.12.2007: Version 0.8.6
- Added Nagra2 0501 dyn. AU execution fix.
- Added Nagra2 4101 map58 AU (though already outdated). Using unified ECC code
for map57 & map58.
- Added instruction cycle counter to Nagra ST7/19 cpu emulation.
- Added support for recent Nagra2 0101/0901 ECM (including map4e/22/3e cycle
calculation, timer/CRC hardware simulation, DES map, EEPROM updates, dynamic
ECM code, auxserver V2 call).
- Added Nagra2 config option to drop EMM-S packets.
- Added Nagra1 UK reg05 fix (i.e. moved it from N2 to N1).
- Added TPS AU fix.
- Added SVDR commands to inject keys and to configure logging to file.
- Removed some gcc'isims (case ranges, named variadic macros, variable length
arrays).
- Updated finnish translations.

Цитата

Hi,

I'm pleased to announce a the maintenance release 0.8.1. You can
find it on my homepage as usual:

http://home.vr-web.de/~rnissl

Excerpt from HISTORY:

2008-01-01: Version 0.8.1

- Updated documentation mentioning binary and devel packages
for xine-lib-1.2, so compiling xine can be ommited for some
distributions.
- Updated INSTALL regarding XINE VDR VERSION MISMATCH.
- The xine-lib.patch for xine-lib-1.1.x nolonger contains any
FFmpeg fixes for H.264 decoding. It is recommended to install
a recent FFmpeg and to add --with-external-ffmpeg when
configuring xine-lib.
- Contributed some xine-lib options for H.264 decoding.
- Adopted name and files changes of vdr plugin in xine.
- Updated it_IT.po and xineI18n.h (thanks to VDR Italian for
providing the translations).
- Implemented makefile switch VDR_XINE_VERIFY_BITMAP_DIRTY to
turn off dirty bitmap verification and hence safing calls to
memcpy() and memcmp() for OSD operations.
- Removed TCP_NODELAY for the video stream socket to reduce
network load.
- Fixed OSD scaling for HD subtitles. The scaler nolonger
allocates a fixed size buffer for a 720x576 OSD but guesses
typical maximum OSD sizes, i. e. 720x576, 1280x720, 1920x1080.

Enjoy.

Цитата

Dear Fritz!Box- and VDR-Users,

a new version of the Fritz!Box Plugin is available at
http://joachim-wilke.de/index.htm?alias=vdr-fritz

Pay attention to the new setup option "country code" which should be
set to the own country code, i.e., "+49" for Germany. As this is the
default, only users not living in Germany need to change this.

- - -

The Fritz!Box Plugin connects to your Fritz!Box to inform you about
incoming calls. The plugin can automatically mute or pause VDR when a
call comes in.

Via VDR's main menu you can browse your Fritz!Box phone book, the call
lists and initiate calls out of all lists.

- - -

The last changes are:
2008-01-06: Version 0.0.10
- including patch to avoid compilation conflicts with C++ STL
(suggested by Reinhard [11])
- normalizing numbers before comparison, e.g., handling +4989..., 004989...,
and 089 the same. This introduces a new setup option "Country Code".
(suggested by Reinhard [11])
- applied retry delay on communication failures to _all_ connection types
- applied retry delay on receiving invalid data in cFritzListener to
avoid log flooding
(reported by Marcus [21])
- added a warning regarding call monitor activation in syslog
- fixed cTcpClient to correctly detect a connection reset

- - -

Regards,
Joachim.

Цитата

VDR developer version 1.5.13 is now available at

ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.13.tar.bz2

A 'diff' against the previous developer version is available at

ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.5.12-1.5.13.diff


WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.


The changes since version 1.5.12:

- Fixed the declaration of cSubtitleObject:ecode8BppCodeString() (thanks to
Gregoire Favre).
- The new setup option "Miscellaneous/Emergency exit" can be used to turn off
the automatic restart of VDR in case a recording fails for some reason.
- The kInfo key is now propagated to any open menu, so that it can react to it
in a context sensitive manner (suggested by Andreas Brugger). If there is
no menu open it will show the info of the current broadcast or replay.
- cTimeMs now uses the monotonic clock, if available (thanks to Petri Hintukainen).
- Fixed cVector::Clear() and cStringList::Clear().
- Added cString::Truncate().
- Fixed the "i18n:" target in the "newplugin" script, so that it can create the
initial *.pot file.
- Fixed handling the '-l' option.
- Fixed error handling in cCuttingThread::Action() (thanks to Udo Richter).
- Fixed a loss of the date display in the "classic" skin's main menu (reported by
Andreas Brugger).
- Added a missing setting of lastFreeMB in cMenuMain::Update() (reported by
Andreas Brugger).
- Added '-Wno-parentheses' to the compiler options in order to avoid silly compiler
warnings for expessions like 'a || b && c', where GCC 4.3 wants to force the
programmer to write 'a || (b && c)', while everybody knows that '&&' links
stronger than '||' (reported by Tobias Grimm).
- Updated the Hungarian language texts (thanks to Istvбn Fьley).
- Fixed displaying weekday names in the Schedule menu if the system uses UTF-8
(reported by Jiri Dobry).
- The new plugin "pictures" implements a simple picture viewer.
See PLUGINS/src/pictures/README for details.
- The automatic shutdown is now suppressed if the remote control is currently
disabled (suggested by Helmut Auer, implemented by Udo Richter).
- Added a section about "Logging" to PLUGINS.html (suggested by Torsten Kunkel).
- Enhanced the SVDRP command CLRE to allow clearing the EPG data of a particular
channel (thanks to Benjamin Hess).

*When reporting problems, please don't reply to this message!*
Create a new thread instead, using a descriptive subject!

Have fun!

Klaus

Цитата

Description:
Channellists - A VDR Plugin to manage your Channellists

Based on vdr-channelswitcher-0.0.1b but rebuild from scratch.
The classes for saving and restore the timers are from the vdr-setup-0.3.1.
Also I took some inspiration from other plugins like extrecmenu...

Requirements:
VDR >= 1.4.5

Installation:
Theres nothing special about it. Install it like any other standard
plugin (unpack, soft link, make plugins).


Usage:
With this plugin you can manage your channellist collection
The plugin shows a list of all channellists stored in /vdrconfdir/plugins/channellists
These channellists have to be named like channels.conf.cable or channels.conf.sat

Menu - Options - Are:
Ok - Reload - save timers and rewrite the current channels.conf with the selected list
Red - Rename - open a editmenu for renaming the selected list
Green - Copy - open a editmenu for copying the selected list
Yellow - Delete - delete the selected list
Blue - Save - open a editmenu for saving the current channels.conf
Back - Exit - leave the menu

SVDRP:
The plugin provides a svdrp command RELOAD with an optional argument /path/to/channels.conf
With no argument RELOAD reloads the current channels.conf

svdrpsend.pl plug channellists reload
svdrpsend.pl plug channellists reload /path/to/my/channellist

Setup Option:
- Hide main menu entry: Hides the plugin main menu entry

Цитата

Hi,

a new version of IPTV plugin for both stable and developer VDR series is
now available:

http://www.saunalahti.fi/~rahrenbe/vdr/iptv/

2008-01-20: Version 0.0.6

- Fixed some lint warnings.
- Added Italian translation (Thanks to Gringo).
- Added '-Wno-parentheses' to the compiler options.
- Mapped 'kInfo' as help key in setup menu.
- Refactored statistic collecting code.