VDR+SC+STREAMDEV-SERVER

  • Всем привет, я у вас тут первый раз и поэтому куча вопросов. После того как сдох проект sasc-ng пришлось переходить на что то живое, нашел только одну альтернативу VDR+CS+Streamdev-server... и тут возникли сложности.
    Моя сборка
    OS : Slackware 13 x86
    VDR - 1-7-9


    StreamDEV - 0-5-0


    SC - 0-9-2


    Собралось всё отлично (xine и альтернативные приблуды вывода не ставил, т.к. требуется только вещание по сети).


    Запустил vdr из консоли и тишина , ничего не происходит... стал копать , через некоторое время пришел к такому виду запуска


    vdr --localedir=/video/locale --lib=/video/plugins/lib -c /video -P sc -P streamdev-server -p 0 -w 60 -D 0
    и тут произошло чудо в консоль стало вываливаться куча всякой всячины от SC, не от VDR и от Streamdev'a ничего не пишется, у Streamdev'a поднялся http, там скачал линк для VLC но ничего не вещается.


    подробнее лог процесса




    root@TV100:/# vdr --localedir=/video/locale --lib=/video/plugins/lib -c /video -P sc -P streamdev-server -p 0 -w 60 -D 0
    Oct 14 23:30:15.221 [general.info] SC version 0.9.2-AR-65e7c7696e9d initializing
    Oct 14 23:30:15.221 [general.debug] probing /dev/dvb/adapter0/frontend0
    Oct 14 23:30:15.221 [general.debug] capturing device 0
    Oct 14 23:30:15.236 [general.info] captured 1 video device
    Oct 14 23:30:15.237 [general.info] SC version 0.9.2-AR-65e7c7696e9d starting
    Oct 14 23:30:15.237 [core.load] ** Plugin config:
    Oct 14 23:30:15.237 [core.load] ** Key updates (AU) are enabled (active CAIDs) (no prestart)
    Oct 14 23:30:15.237 [core.load] ** Local systems DON'T take priority over cached remote
    Oct 14 23:30:15.237 [core.load] ** Concurrent FF recordings are NOT allowed
    Oct 14 23:30:15.237 [core.load] ** Force transfermode with digital audio
    Oct 14 23:30:15.237 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
    Oct 14 23:30:15.237 [core.load] ** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    Oct 14 23:30:15.237 [general.info] loading cardclient config from /video/plugins/sc/cardclient.conf
    Oct 14 23:30:15.237 [cardclient.newcamd] now using protocol version 525 (cdLen=8)
    Oct 14 23:30:15.237 [cardclient.core] hostname=192.168.225.100 port=21050 emm=1 emmCaids 0500/23d00
    Oct 14 23:30:15.237 [cardclient.core] Newcamd: username=dummu password=dummy key=0102030405060708091011121314
    Oct 14 23:30:15.237 [core.net] netwatch up
    Oct 14 23:30:15.238 [core.net] connecting to 192.168.225.100:21050/tcp (192.168.225.100)
    Oct 14 23:30:15.246 [cardclient.login] Newcamd: CaID=0500 admin=1 srvUA=00000000C1A8A215 provider 023D00/00000000C1A8A215 FFF500/00000000C1A8A215
    Oct 14 23:30:15.246 [cardclient.core] client 'Newcamd' ready
    Oct 14 23:30:15.246 [general.error] failed open /video/plugins/sc/SoftCam.Key: No such file or directory
    Oct 14 23:30:15.246 [general.error] failed open /video/plugins/sc/smartcard.conf: No such file or directory
    Oct 14 23:30:15.246 [general.error] failed open /video/plugins/sc/cardslot.conf: No such file or directory
    Oct 14 23:30:15.246 [general.error] failed open /video/plugins/sc/override.conf: No such file or directory
    Oct 14 23:30:15.246 [general.error] no keys loaded for softcam!
    Oct 14 23:30:15.246 [core.load] ** registered systems:
    Oct 14 23:30:15.246 [core.load] ** SC-Irdeto (pri -5)
    Oct 14 23:30:15.246 [core.load] ** SC-VideoGuard2 (pri -5)
    Oct 14 23:30:15.246 [core.load] ** SC-Conax (pri -5)
    Oct 14 23:30:15.246 [core.load] ** Fake-NDS (pri -12)
    Oct 14 23:30:15.246 [core.load] ** Seca (pri -10)
    Oct 14 23:30:15.246 [core.load] ** @SHL (pri -10)
    Oct 14 23:30:15.246 [core.load] ** Nagra (pri -10)
    Oct 14 23:30:15.246 [core.load] ** Nagra2 (pri -10)
    Oct 14 23:30:15.246 [core.load] ** SC-Seca (pri -5)
    Oct 14 23:30:15.246 [core.load] ** ConstCW (pri -20)
    Oct 14 23:30:15.246 [core.load] ** Cryptoworks (pri -10)
    Oct 14 23:30:15.246 [core.load] ** Viaccess (pri -10)
    Oct 14 23:30:15.246 [core.load] ** SC-Viaccess (pri -5)
    Oct 14 23:30:15.246 [core.load] ** Irdeto (pri -10)
    Oct 14 23:30:15.246 [core.load] ** Irdeto2 (pri -8)
    Oct 14 23:30:15.246 [core.load] ** SC-Nagra (pri -5)
    Oct 14 23:30:15.246 [core.load] ** SC-Cryptoworks (pri -5)
    Oct 14 23:30:15.246 [core.load] ** Cardclient (pri -15)
    Oct 14 23:30:15.246 [core.load] ** Conax (pri -10)
    Oct 14 23:30:15.246 [core.caids] 0: building caid lists
    Oct 14 23:30:15.246 [core.caids] 0: after unique
    Oct 14 23:30:15.246 [core.caids] 0: after check
    Oct 14 23:30:15.246 [core.caids] 0: after unique
    Oct 14 23:30:15.247 [core.ci] no active CAIDs
    Oct 14 23:30:15.247 [core.ci] card 0, slot 0 (v= 1) caids:
    Oct 14 23:30:15.247 [core.ci] 0: reset of slot 0 requested
    Oct 14 23:30:15.247 [general.info] Using software decryption on card 0
    Oct 14 23:30:16.800 [core.ci] 0.0: doReply changed, reset triggered
    Oct 14 23:30:16.800 [core.ci] 0.0: now using CAIDs version 1
    Oct 14 23:30:16.800 [core.ci] 0.0: status 'present'
    Oct 14 23:30:17.301 [core.ci] 0.0: status 'reset'
    Oct 14 23:30:18.303 [core.ci] 0.0: status 'present'
    Oct 14 23:30:20.342 [core.pids] 0: now tuned to source 8a30(S56.0E) transponder 33d15


    причем когда я клацаю в VLC на кнопке PLAY появляется Oct 14 23:30:20.342 [core.pids] 0: now tuned to source 8a30(S56.0E) transponder 33d15
    а дальше тишина!!!


    вот мой channels.conf


    2;HTB+:12245:V:56.0E:27500:2021:2022=rus:0:1:2802:112:280:0


    а вот setup.conf



    AntiAlias = 1
    AudioLanguages =
    ChannelEntryTimeout = 1000
    ChannelInfoPos = 0
    ChannelInfoTime = 5
    CurrentChannel = 1
    CurrentDolby = 0
    CurrentVolume = 255
    DefaultLifetime = 99
    DefaultPriority = 50
    DiSEqC = 0
    DisplaySubtitles = 0
    EmergencyExit = 1
    EPGBugfixLevel = 0
    EPGLanguages =
    EPGLinger = 0
    EPGScanTimeout = 0
    FontFix = Courier:Bold
    FontFixSize = 15
    FontFixSizeP = 0.031000
    FontOsd = Sans Serif:Bold
    FontOsdSize = 18
    FontOsdSizeP = 0.038000
    FontSml = Sans Serif
    FontSmlSize = 17
    FontSmlSizeP = 0.035000
    InitialChannel = 0
    InitialVolume = -1
    InstantRecordTime = 180
    LnbFrequHi = 10600
    LnbFrequLo = 9750
    LnbSLOF = 11700
    MarginStart = 2
    MarginStop = 10
    MarkInstantRecord = 1
    MaxVideoFileSize = 2000
    MenuKeyCloses = 0
    MenuScrollPage = 1
    MenuScrollWrap = 0
    MinEventTimeout = 30
    MinUserInactivity = 300
    MultiSpeedMode = 0
    NameInstantRecord = TITLE EPISODE
    NextWakeupTime = 0
    OSDAspect = 1.000000
    OSDHeight = 403
    OSDHeightP = 0.840000
    OSDLanguage =
    OSDLeft = 58
    OSDLeftP = 0.080000
    OSDMessageTime = 1
    OSDSkin = sttng
    OSDTheme = default
    OSDTop = 38
    OSDTopP = 0.080000
    OSDWidth = 624
    OSDWidthP = 0.870000
    PauseKeyHandling = 2
    PauseLifetime = 1
    PausePriority = 10
    PrimaryDVB = 1
    PrimaryLimit = 0
    RecordingDirs = 1
    ResumeID = 0
    SetSystemTime = 0
    ShowInfoOnChSwitch = 1
    ShowReplayMode = 0
    SplitEditedFiles = 0
    SubtitleBgTransparency = 0
    SubtitleFgTransparency = 0
    SubtitleLanguages =
    SubtitleOffset = 0
    SVDRPTimeout = 300
    TimeoutRequChInfo = 1
    TimeSource = 0
    TimeTransponder = 0
    UpdateChannels = 5
    UseDolbyDigital = 1
    UseSmallFont = 1
    UseSubtitle = 1
    UseVps = 0
    VideoDisplayFormat = 1
    VideoFormat = 0
    VpsMargin = 120
    ZapTimeout = 3
    streamdev-server.AllowSuspend = 0
    streamdev-server.HTTPServerPort = 10000
    streamdev-server.HTTPStreamType = 1
    streamdev-server.MaxClients = 20
    streamdev-server.ServerPort = 2004
    streamdev-server.StartHTTPServer = 1
    streamdev-server.StartServer = 1
    streamdev-server.SuspendMode = 0



    Уже неделю бьюсь, может у кого есть какие мысли по поводу этого???

  • Первым делом смотри это...
    Под своё настрой!



    LnbFrequHi = 10600
    LnbFrequLo = 9750
    LnbSLOF = 11700


    Насколько я понял... это 36 градусник ...


    LnbFrequHi = 10750
    LnbFrequLo = 10750
    LnbSLOF = 10750



    У меня так в настройках.