"Прочие" имиджи и аддоны (часть-4)

  • Да как я только не пробывал ;(
    На руДриме всё ништяк, так я вот что думаю мож не gemini этого сделать нильзя ?(

  • Заюзал и я Джемини, пока предпоследний 2.40... Нравится, нет слов...Очень стабилен. Конечно, меню далеко от удобства, т.к. многие нужные вещи приходится искать где-то в недрах подменю, да и сами подменю очень разные и безсистемные, а подсказок внизу окон по сути и нет, что после ruDream Neutrino просто убивает, но ко всему можно привыкнуть.

    Сообщение было отредактировано 1 раз, последнее редактирование пользователем Uris ().

  • 2Stupinez:
    У меня на GEMENI 2.50 -OK. Проверил и в OPERA, и в EXPLORER. Может у тебя FIREWALL не пускает? Я пользую OUTPOST, так у него иногда бывают заморочки. Приходится адреса и приложения прописавать заново в разрешённые.

  • Цитата

    Со слов пользователя helica
    2Stupinez:
    У меня на GEMENI 2.50 -OK. Проверил и в OPERA, и в EXPLORER. Может у тебя FIREWALL не пускает? Я пользую OUTPOST, так у него иногда бывают заморочки. Приходится адреса и приложения прописавать заново в разрешённые.


    Проблема с файерволлами в сети часто возникает, поэтому в первую очередь для проверки отключаем их и антивирусы.

  • подтвеждаю web работает ок хотя поначалу тоже висяк был
    странно но заработал когда я попытался в веб зайти при стендбае дрима .. и нормально вошел .. а теперь всегда ок

  • Вопрос про установку имиджа на хдд,
    есть дм500s присобачен hdd по nfs и по cifs, при попытке установить имидж туда(flashwizard 6.1) - процесс установки доходит до 40-60% процентов и обламывает типа "испорчен файл или нет места". Файл нормальный точно, места то же полно. Во флэшь заливал разные и CVS и оригинал, пофиг - рузультат один. Посоветуйте плиз что нибудь ?(

  • на хдд не пробовал говорят винт постоянно крутитmся будет и гудеть
    на usb скока угодно ставил все работает
    еще про маунт nfs cifs ничто из них не мешает. может они одну и ту же точку маунта пользуют /mount/hdd
    убери для пробы nfs

  • 2 vitos13
    У человека 500 дрим, там нет ЮСБ.
    2 Trier
    А вообще он у тебя примаунтился нормально? Т.е. пишет ли на диск фильмы, например. И вообще, инфы побольше надо. Какой имидж внутри? Какой ставишь?

  • Цитата

    Со слов пользователя Trier
    2 Trier
    А вообще он у тебя примаунтился нормально? Т.е. пишет ли на диск фильмы, например. И вообще, инфы побольше надо. Какой имидж внутри? Какой ставишь?


    В общем ситуация немного прояснилась...
    Было во флэше гемини2.5 - моунт по nfs с выньхр - видео пишется - имиджи не ставятся. пробовал лить (флэшвизард 6.1) гемини(разные), квс, рудрим,SF, все версии самые последние на данный момент. рудрим сразу облом. остальные до 40-60% ставятся, потом ошибка. при чём на хдд папки с имеджами появляются но конечно не полные.
    То же самое если во флэше CVS.
    Теперь во флэше гемини2.5 - моунт по nfs с Linux сервака. всё зашибись прошло. поставил SF и CVS. рудрим естессно не попёр =)
    И багов: во время одной из перезагрузок дрима слетел имидж во флэше - типа загрузилось, а там всё как будто только установил...
    И ещё почему то все настройки в примонтированом имидже берутся из стоящего во флэше, хотя галку в визарде убрал специально, что б ничего не перенеслось.
    Странно всё это.
    Уф... даже пальцы устали :D

  • Не понял зачем ссылка в топ про 500 ?? имедж вышел под все модели дримов - просто я проверял на 500 . Другого у меня нету куда его еще влить можно

  • ===============
    SDT DaVinci 5.8
    Satnews Dreambox Team
    xyzt://www.satnews.tv.it



    - Kernel 2.6.9 (with new sw 1_1_0)
    - Enigma compiled 27/05/2006 - CVS modified by SDTeam
    - Satellites.xml 19.05.2006 by Lyngsat
    - WebIf 5.9.7-Expert-Enhanced (SDT)
    - TuxTxt 1.98 (teletext)
    - Tuxbox Commander v1.14fix (SDT fix)
    - Movieplayer 0.8.1
    - SDTboss Panel v2.7.1
    - emuboss v2.9.7 (emumanager)
    - SmartInit v1.2



    New in DV 5.8:
    ==============


    - factory software rel 1.1.0
    New software version from DMM
    Fixes many boot problems, and speeds-up booting of the box


    - Tuxbox Commander v1.14 fix:
    fixed *HUGE* memory leak of Tuxbox Commander plugin, which caused often an enigma crash
    No more crashes here with Tuxcom!


    - EPG Wizard 1.4
    fixed rare instance causing a restart of enigma when downloading epg


    - SDT Boss Panel v2.7.1 - emuboss v2.9.7
    fixed launching emus with similar name, now correctly detected

    Сообщение было отредактировано 1 раз, последнее редактирование пользователем sonai ().

  • извините перенес пост в более подходящую тему:


    Plugins for Dream-различные "примочки" для Дрима

    Сообщение было отредактировано 5 раз, последнее редактирование пользователем Andr ().

  • ANONS
    STOIT TESTOVAT
    u crotov est dlya usb


    PLI-Flubber



    The Flubber suite includes the following components:
    2.6.9 kernel
    2.6.9-dream-s8 kernel for the 7020
    1.09 enigma (28-07-2006)
    1.1.0 Head.ko
    Front Processor version 1.06 for DM7000
    Front Processor version 1.01 for DM7020
    Squashfs 2.2-r2 with LZMA-compression for the dm5xx(x) and dm7000 boxes
    Tuxtxt v1.98
    Web Interface: 5.9.7-Expert - PLi edition



    New in Flubber
    MultiEPG has been updated to show a Picture in Graphic (PiG). This works for the dm7000 and dm7020 boxes. Unfortunately, due to hardware limitations, the dm5xx(x) boxes do not support PIG. Instead a placeholder will be shown instead. Flubber includes a special fix to also make this work for NTSC systems. The event genre is now also shown in the event description window (when available). Now in Flubber you can even use '<' and '>' to quickly jump backward / forward in time.


    Flubber supports reading 32-bit (!) png images as skin images and writing 32-bit osdshots. The Enigma internal picture viewer now works in 32-bit colormode for dm7000 and dm7020, and 8-bit mode for dm5xx(x), which now at least allows to show images on dm5xx(x). Scaling, resizing, and pan images has also been implemented. See the technotes pages.


    The Skin/OSD on dm7000 and dm7020 still defaults to 8-bit colormode, but a 32-bit version of the default skin (MediaPLi) is available, to enjoy the pleasure of a full 32-bit OSD. The reason for not setting the default to 32-bit, is that several boxes show occasional green glitches in the mpeg stream, while they are in 32-bit mode. As it seems due to hardware/driver limits. We suggest you try for yourself how your 70x0 box works with 32-bit, so it is up to you to use either the 8-bit or 32-bit version of our revolutionary MediaPLi skin. Note that we have hugely improved the 8-bit possibilities for skins, by parsing palette colors from the skin images. So owners of 8-bit boxes are certainly not left behind.




    See the skin technotes for more details.
    As of this version you can choose where EPG data will be stored. Until now, this data was always stored in memory. When large amounts of EPG data were read, performance of the box degraded, due to lack of free memory. Within Flubber you can choose between two storage locations:



    EPG Memory store: The conventional way of epg data storage. This is the default.
    EPG SQLite store: Data is stored in a SQLite database, which resides in a file.


    The EPG SQLite store supports storing over a network! (e.g. via CIFS). See the EPG store technotes for more details.
    Skin:



    for skindevelopers: introduction of the 'c' specification for centered positioning. This makes it easier to develop TV-system independent skins. The 'c' takes the center postion of the parent (client)rectangle. Use it in the same way as the 'e' specification. To center a widget of 500 by 300 pixels position="c-250:c-150" size="500:300". See the skin technotes for more details.
    Now support gauges for progress bars. Both gauges and progress bars do support images, again, the MediaPLi skin demonstrates what is currently possible with your new Flubber image.


    See the skin technotes for more details.
    Commercial skip: use the '<' and '>' (next to '0' key) to quickly skip 15 seconds back or 60 seconds forward in the recording you are currently playing
    Mount manager now supports hostnames as well as ip-addresses
    Added possibility to move /var to CF card
    Added var_flash dir, this dir is allways mounted to the flash dir so can be used for copying the animations
    Proper support for NTSC in OSD. The default MediaPLi skin is properly set so all OSD screens do fit for both PAL and NTSC. Furthermore, all built-in enigma windows are centered, on PAL as well as NTSC. (note that when a widget is defined with a height > 480 there is nothing we can do for NTSC)
    Reintroduced asking for TV system: Now users again can select their TV-system (PAL/NTSC) after flashing, making it easier to properly configure PLi in the setup wizard.
    Added the genoSUAVE North American satellites lists (DishPro / Legacy)
    And we have done even more for our N.A. users: with Flubber, PLi now fully supports the USA DishNetwork EPG. Dish EPG is fully integrated into PLi's enigma, so all currently available EPG viewers will automatically be able to use it. (thx to the Nitro team for the Dish decryption routines)
    The used satellites.xml is now dependent on the timezone which is selected at first startup. After selecting a timezone the satellites.xml used in that area will be copied to /var/etc. For now only Europe and North America are available
    On zap an optional minizap OSD is shown. This OSD will go away after a timeout. When 'OK' is pressed, the minizap will expand to the full infobar. This is nicely demonstrated in the default MediaPLi skin.
    Removed camx/serverng softcam/cardserver and added CCcam v1.2.1 as default in the dm5xx(x) boxes. CCcam is in "ROM" now (and not removable).
    The minimal dm5xx(x) VAR-size is now 27%! Achieved by moving CCcam to "ROM"
    PPanel:
    - download fix, now via eHTTP
    - downloads can be aborted now
    - installed packages are marked in the download menu
    - software management is refreshed after download of a new menu
    - added support for mp3, streaming mp3, video files and text files
    - added download indicatorbar
    - remove manual install files (*.tar.gz) in /tmp after manual install to free memory
    WebIf: added Enhanced SatFinder (Zoom)
    Last Scanned userbouquet feature. During scanning an userbouquet "Last Scanned" will be made for the TV,Radio and Data services. This bouquet will show all found services.
    Start your plugins via the help-button on your remote. Edit the registry: "s:/ezap/plikeyfunction=plugin#pluginname.cfg" to start your defined plugin, or "s:/ezap/plikeyfunction=plugins" to create the same function as your yellow button.
    Bouquette down key brings you to the bouquet list instead of poviderlist
    Bouquet up/down in MultiEPG opens the service selector in bouquet mode
    Outside MultiEPG, the bouquet down key now also activates to the bouquet list instead of povider list, so you can conveniently open the service selector and scroll to the desired bouquet, with either up or down
    Added Rebuild Movielist (Dream - File Mode - Playlist [yellow button] - Dream - Rebuild Movielist)
    Fixed an off by one minute in the remaining event duration, in OSD now/next
    Cron job is fixed for dm5xx(x) boxes
    Introduced help texts for virtually all enigma windows (activated using the 'help' key on your remote)
    DM7020 help texts translated into English (used to be German)
    Removed smb-client and Samba-server from the dm7000 image, moved to downloads in the software manager
    Frysk language update



    General features
    Custom PLi Web Interface
    OSD supports: Yellow Button - Addons/Plugins, Blue Button - PLi Setup
    Softcam / Cardserver setup incl. Sticky SoftCams
    FTA detection: no more softcam switching when zapping FTA channels in sticky softcam mode
    Private EPG for Premiere
    Manual (un)install of plugins/addons etc
    Enable/disable automatic download of software menu
    Extra Tools: Check Cronjobs & Free Space; ECM-, Memory-, Mgcamd-Info, NetStat, Process list
    Settings to control infobar on Zap and OK
    Skin:
    - MediaPLi default skin
    - 3 skin modes selectable from PLi image setup
    - Custom background images for radio and file mode
    - Name of the current running emu (e.g. 'CCcam')
    - Video format of the current service (e.g. '704x576 4:3 25 fps')
    - Caid types supported in the current stream (yellow)
    - Currently used Caid (green)
    - Frequency, FEC, Polarisation, Symbol rate
    - Indicator for teletext
    - Indicator for extra audio options
    Language Setup
    /var indicatorbar in Pli setup
    Var to CF/HDD/USB
    Debug Settings
    Create your own script control panel under the Blue Setup button
    Firewall ready
    Crond ready
    Dropbear
    Password change allowed by user to any password
    Games ready
    CIFS enabled
    New filenaming of your Recorded Movies:
    [Channelname]-[date]-[time]-[Name_of_the_Program]
    Multiview
    MultiEPG
    Full Media Highway EPG support for ALL Media Highway EPG providers
    Menu Language selection in your own native language
    Multiview Icons hosted in /share/tuxbox/enigma/pictures/mvicons,
    this reduces /var with 300Kb!
    Add/change/update your icons in /var/tuxbox/config/enigma/pictures/mvicons
    Firewall for the 7020
    VCR recording for the 500
    LCD animation manager via PPanel download
    Autostart gSUB if available, configurable in PLi image setup
    PPanel updates including plugins, packages and progress indicator
    CCcam SoftCam standard onboard on dm5xx(x) boxes
    No SoftCams onboard on dm70x0 boxes, ALL to be downloaded

  • Подскажите, кто пользовался. Загрузка аддонов есть из интернета, или нет. Поставил имидж, понравился. Но не могу скачать русский язык и другие дополнения, через минуту раздумий, пишет, что не подключился к серверу. Или там хитрость какая?