[ANNOUNCE] VDR version 1.4.0 released

Цитата

VDR version 1.4.0 is now available at

мало того - это СТАБИЛЬНАЯ версия! ура!

VDR 1.4.0

* New stable release with many fixes and improvements.

Можешь начинать новые куражи писать! Я тоже буду пробовать свои писать.

root@lorien:/usr/local/src/VDR# ./vdr -V
vdr (1.4.0/1.4.0) - The Video Disk Recorder

=)

Ну ну смейся!! Не пройдёт полгода я тоже запущу 1.4.0!

Цитата

Со слов пользователя free-x

Исходный код

root@lorien:/usr/local/src/VDR# ./vdr -V
vdr (1.4.0/1.4.0) - The Video Disk Recorder

=)

Ждёмс

В этот раз Клаус не обманул =)

Мы подождем пару дней Все начали как сумасшедшие свои плагины для 1.4.х выпускать ....

make ..........  plugins
.......
*** plugins without APIVERSION: sc

я что-то пропустил кажись? это можно выправить?

Исправь в makefile слово VDRVERSION на APIVERSION

прочитал INSTALL - исправил ручками - в трех местах Makefile
собрал, запутил ./vdr -Psc
интересная фича ---- при переключении каналов вдр пропускает кодированные каналы -
прыгает только по fta

чует мое сердце - дело в импрувментах

Conditional Access

* Improved CAM handling.
* The file 'ca.conf' has been removed. VDR now automatically detects which device contains a CAM that can decode a channel.
* Removed the now obsolete CaCaps stuff. The Setup/CICAM menu now displays the actual CAM type as reported by the CAM.
* The Setup/CICAM menu now only contains the devices that actually have a CI and dynamically detects the number of slots a CI provides.
* The CAM menu now automatically updates itself in case of a progress display (as used, for instance, when updating the firmware via satellite).
* Improved the CAM enquiry menu.

в логах при переключении нечто подобное
cam 0: check ProvidesCa: 0919 -> n=0
cam 0: check ProvidesCa: 0919 -> n=0
cam 0: check ProvidesCa: 0100 -> n=0
cam 0: check ProvidesCa: 0100 -> n=0
cam 0: check ProvidesCa: 0100 -> n=0
cam 0: check ProvidesCa: 0100 -> n=0
cam 0: check ProvidesCa: 0100 0500 0604 -> n=0
cam 0: check ProvidesCa: 0100 0500 0604 -> n=0
cam 0: check ProvidesCa: 0500 0604 0100 -> n=0
cam 0: check ProvidesCa: 0500 0604 0100 -> n=0

в меню установок CA - прочерки ((((

установки у меня все в /video и все старые - из прежней версии 1.46
видимо я что то все-таки неправильно слабал когда makefile правил ((((
ERROR: no keys loaded for s*ftc*m!

сорри - больной на голову - после правки makefile запустил просто make plugins
без указания параметров ...=1 ...=1

после нормальной сборки - все заработало....

Установил 1.4.0 с стартом пи запуске компа если если пытаюсь остановить ВДР "runvdr stop" то и дрова для DVB тоже выгружаются если делаю старт то они больше не грузяться! Где этот момент можно подправить?

cvотри сам скрипт runvdr оттуда и убивается и запускается драйвер

загрузку я в нем прибил - там отдельный блок
# Load driver if it hasn't been loaded already:
# if [ $LSMOD -eq 0 ] ; then
# (cd $DVBDIR; make insmod)
# fi

а вот убивство драйвера где - не знай )))) это чтоли .....
(cd $DVBDIR; make rmmod; make insmod)

ваще я это про скрипт который с вдр идет ..... и чтото я в нем не вижу
отработку start stop ////
а ты какой скрипт runvdr пользуешь? от ArVDR?

Я пробовал весь ВДР установить по этому скрипту Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

фиг его знает куда они положили его - ищи в /usr/local/bin

Цитата

VDR maintenance patch 1.4.0-1 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

This is a 'diff' against the official version 1.4.0.

Small fixes to the officially released VDR versions will be first
made available as "maintenance patches" in the Developer directory,
so that they can be reviewed and tested before a new official
release is published.

So please apply this patch to the original VDR version 1.4.0 and
report whether it works (or if it causes any new problems).

The changes since version 1.4.0:

- Updated 'S110W' in 'sources.conf'.
- Adjusted the 'runvdr' script so that the user can fill in the functions to
detect, load and unload the necessary driver modules (thanks to M. Kiesel for
reporting that it still used DVBDIR).
- Added 'eval' to the $VDRCMD call in 'runvdr' to avoid problems with quoting
(suggested by Udo Richter).
- Fixed missing ',' in the Italian and Polish OSD texts (thanks to Marko Mдkelд).
- Updated the Czech OSD texts (thanks to Vladimнr Bбrta).
- Fixed handling the "Power" key in case a timer is about to start recording
(thanks to Udo Richter).
- Fixed the character 'r' in fontosd and fontsml for iso8859-2 (thanks to Vladimнr
Bбrta).
- When checking whether a VPS timer has entered the "VPS margin", the event's start
time is now used instead of the timer's start time, because otherwise events that
start way off of their VPS time wouldn't be recorded correctly.
- If VPS timers are active, their events are now being kept up to date if there
are any free devices available.
- Fixed the character #207 in fontosd for iso8859-2 (thanks to Vladimнr Bбrta).
- Fixed handling unknown codes when learning LIRC remote control codes (reported
by Helmut Auer).
- Since some channels (especially the Austrian ORF) randomly change the ids of their
EPG events, VDR now gives the start time precedence when searching for existing
events.
- Fixed automatically updating the CAM menu in case the whole operation (for
instance a firmware update) takes longer than the menu timeout.

Have fun!

Показать весь код

Цитата

VDR maintenance patch 1.4.0-2 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

This is a 'diff' against the official version 1.4.0 plus all
previous 1.4.0-X maintenance patches.

Small fixes to the officially released VDR versions will be first
made available as "maintenance patches" in the Developer directory,
so that they can be reviewed and tested before a new official
release is published.

So please apply the patches

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

in the given sequence to the original VDR version 1.4.0 and
report whether it works (or if it causes any new problems).

There are several places in the code where I would actually have
had to change some interfaces, but didn't do so in order to keep
the API version constant, so that existing plugins don't need to
be recompiled. However, this also keeps me from including Stefan
Huelswitts fixes to the 'libsi' code. So the question is: is it
worth keeping the API version constant, or should I just go ahead
and bump it up, and drop all the '#if APIVERSNUM...' stuff and
include Stefan's fixes?

The changes since version 1.4.0-1:

- Removed leftover LSMOD=... line from 'runvdr'.
- Modified the Makefile to copy additional libraries a plugin might provide (suggested
by Wayne Keer). See PLUGINS.html for details.
- Fixed handling Transfer Mode when replaying Dolby Digital audio and the option
'-a' was given (based on a patch from Werner Fink). To avoid having to increment
the API version, several #if checks have been introduced around this. These will
be removed once the API version actually needs to be incremented.
- Fixed deleting the 'skinDescriptions' in cMenuSetupOSD::~cMenuSetupOSD() (thanks
to Tobias Grimm).
- Fixed calculating the start time of repeated timers with "first day" (thanks to
Udo Richter).
- Now setting a timer's cached start time to 0 after a call to Skip() (thanks to
Udo Richter).
- Fixed handling the running status of EPG events in case the "Schedule" menu is
currently open (i.e. a write lock on the schedules data can't be achieved).
- Fixed handling VPS timers in case the EPG event hasn't been 'seen' in a while.
- Fixed calculating the cache size in cUnbufferedFile::Read() (thanks to Artur Skawina).
- Removed -fPIC from VDR's and libsi's Makefile (suggested by Prakash Punnoor).
- Modifed the device selection to better handle timer conflicts (reported by
Christian Wieninger).
- Avoiding a compiler warning in libsi's TypeLoop::operator[].
- Now processing the "frequency list descriptor" (based on a patch from Anssi Hannula).
- Improved the repeat function for LIRC remote controls (thanks to Joerg Riechardt).
- Fixed moving channels, which sometimes stopped the current replay session
(reported by Mirko Dцlle).
- Fixed deleting channels in case the current channel's number changes (reported
by Mirko Dцlle).

Have fun!

Klaus

Показать весь код

Цитата

VDR maintenance patch 1.4.0-3 is now available at

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

This is a 'diff' against the official version 1.4.0 plus all
previous 1.4.0-X maintenance patches (which means that you need
to first apply any previously released patches before you can apply
this one).

Small fixes to the officially released VDR versions will be first
made available as "maintenance patches" in the Developer directory,
so that they can be reviewed and tested before a new official
release is published.

So please apply the patches

Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

in the given sequence to the original VDR version 1.4.0 and
report whether it works (or if it causes any new problems).

If no bugs are reported, I'll release this as version 1.4.1
next weekend.

The changes since version 1.4.0-2:

- Fixed the PremiereContentTransmissionDescriptor in 'libsi' (thanks to Stefan
Huelswitt).
- Removed all the compatibility '#if APIVERSNUM...' stuff and instead increased
the API version number - plugins will have to be recompiled.
- Removed the call to pthread_setschedparam(childTid, SCHED_RR, 0) in thread.c,
because it caused a compiler warning with g++ 4.1.1 (reported by Ville Skyttд).
Since the third parameter has to be non-null to have any effect, the call was
presumably a NOP, anyway.
- Fixed the 'clean-plugins' target in the Makefile to also remove additional
plugin libraries (thanks to Wayne Keer).
- Applied the fixes to moving and deleting channels from version 1.4.0-2 to the
SVDRP commands MOVC and DELC as well.
- Fixed handling the display of the '*' indicator in the "What's on now/next?"
menu, so that events that haven't been "seen" in the data stream within 30
seconds won't be shown as "running".
- Fixed handling tabbed item display in 'skincurses'.
- Increased the column spacing in the "Recordings" menu (was too small for the
'skincurses' plugin).
- When the 'skincurses' plugin is loaded, it automatically sets the 'curses'
skin as the current one. This doesn't modify the Setup.OSDSkin parameter, so
that after using 'skincurses' (for instance for debugging) the previously
selected skin will be used again.
- Added some log messages when setting the current skin.
- Only making a second attempt to set the current skin at startup if the first
attempt has failed.
- Now switching to non-VPS timers' channels 60 seconds before the timer starts
(if a free device is available), to allow for the updating of EPG data and CA
descriptors before the actual recording starts.

Have fun!

Klaus

Показать весь код