$c + streamdev-server + оригинальная карта

  • Настал момент настройки $c.


    Что сделал: прочитал FAQ для чайников (спасибо составителям), установил указанный в статье 0.8.3 кам на существующий ArVDR 1.4.7, настроил вставил карту в феникс (карта вакцес, 3.5Мгц, неинвертированный ресет) . Возникла проблема (выдержка из sysslog):


    arvdr kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    arvdr kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    arvdr kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [пропущено]
    arvdr vdr: [3525] WARN: missing plugin '-v' //подозрительная строчка
    [пропущено]
    arvdr vdr: [3525] ERROR (smartcard.c,118): Input/output error


    Можно ли как-то руками проверить, выдается ли что-то в ttyS0 ? То есть правильно ли мой феникс работает и ходит ли между ним и ArVDR информация?

  • vdr.conf:


    PLUGINLIST="sc reelchannelscan streamdev-server network"
    USE_INTERNAL_IR="no"
    METOD="acpi"
    START_FBTV="no"
    START_BT8XX="no"
    START_EM8300="no"
    START_VDR="yes"
    OTHER_OPTS=""
    #LOG="/dev/tty9"
    LOG="/var/log/vdr.log"
    RCMAP="/usr/share/doc/dvb-utils/examples/hauppauge2.rc5"


    sc.conf:


    PARAM="-s /dev/ttyS0"


    феникс подключен к порту com1


    под виндой ATR карты считывается, вот правда в smartcard.conf для такой кодировки не нашел что указывать надо.

    Сообщение было отредактировано 1 раз, последнее редактирование пользователем creator2007 ().

  • vdr.log:
    Nov 14 01:49:39 [core.load] smartcards: added serial port /dev/ttyS0 as port 0 (normal CD, normal RESET, CLOCK 3571200)
    Nov 14 01:49:39 [general.info] SC version 0.8.3 initializing
    Nov 14 01:49:39 [general.debug] probing /dev/dvb/adapter0/frontend0
    Nov 14 01:49:39 [general.debug] capturing device 0
    Nov 14 01:49:39 [general.debug] probing /dev/dvb/adapter1/frontend0
    Nov 14 01:49:39 [general.debug] capturing device 1
    Nov 14 01:49:39 [general.debug] probing /dev/dvb/adapter2/frontend0
    Nov 14 01:49:39 [general.info] captured 2 video devices
    Nov 14 01:49:39 [general.info] SC version 0.8.3 starting
    Nov 14 01:49:39 [general.warn] ScCaps contains unusual value. Check your config! (You can ignore this message if you have more than 16 dvb cards in your system ;)
    Nov 14 01:49:39 [core.load] ** Plugin config:
    Nov 14 01:49:39 [core.load] ** Key updates (AU) are enabled (active CAIDs)
    Nov 14 01:49:39 [core.load] ** Local systems DON'T take priority over cached remote
    Nov 14 01:49:39 [core.load] ** Concurrent FF recordings are NOT allowed
    Nov 14 01:49:39 [core.load] ** Force transfermode with digital audio
    Nov 14 01:49:39 [core.load] ** ScCaps are 1 555 0 0 0 0 0 0 0 0
    Nov 14 01:49:39 [core.load] ** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    Nov 14 01:49:39 [general.error] Failed to open file '/etc/vdr/plugins/SoftCam.Key': No such file or directory
    Nov 14 01:49:39 [core.load] loaded 0 keys from /etc/vdr/plugins/SoftCam.Key
    Nov 14 01:49:39 [general.error] no keys loaded for softcam!
    Nov 14 01:49:39 [core.load] ** registered systems:
    Nov 14 01:49:39 [core.load] ** Viaccess (pri -10)
    Nov 14 01:49:39 [core.load] ** @SHL (pri -10)
    Nov 14 01:49:39 [core.load] ** Seca (pri -10)
    Nov 14 01:49:39 [core.load] ** SC-Viaccess (pri -5)
    Nov 14 01:49:39 [core.load] ** SC-Seca (pri -5)
    Nov 14 01:49:39 [core.load] ** SC-Nagra (pri -5)
    Nov 14 01:49:39 [core.load] ** SC-Irdeto (pri -5)
    Nov 14 01:49:39 [core.load] ** SC-Cryptoworks (pri -5)
    Nov 14 01:49:39 [core.load] ** SC-Conax (pri -5)
    Nov 14 01:49:39 [core.load] ** Nagra (pri -10)
    Nov 14 01:49:39 [core.load] ** Nagra2 (pri -10)
    Nov 14 01:49:39 [core.load] ** Irdeto (pri -10)
    Nov 14 01:49:39 [core.load] ** Cryptoworks (pri -10)
    Nov 14 01:49:39 [core.load] ** ConstCW (pri -20)
    Nov 14 01:49:39 [core.load] ** Conax (pri -10)
    Nov 14 01:49:39 [core.load] ** Cardclient (pri -15)
    Nov 14 01:49:39 [general.error] Failed to open file '/etc/vdr/plugins/Viaccess.KID': No such file or directory
    Nov 14 01:49:39 [core.load] loaded 0 Viaccess cards from /etc/vdr/plugins/Viaccess.KID
    Nov 14 01:49:39 [general.error] Failed to open file '/etc/vdr/plugins/Seca.KID': No such file or directory
    Nov 14 01:49:39 [core.load] loaded 0 Seca cards from /etc/vdr/plugins/Seca.KID
    Nov 14 01:49:39 [general.error] Failed to open file '/etc/vdr/plugins/Ird-Beta.KID': No such file or directory
    Nov 14 01:49:39 [core.load] loaded 0 Irdeto cards from /etc/vdr/plugins/Ird-Beta.KID
    Nov 14 01:49:39 [general.error] Failed to open file '/etc/vdr/plugins/cardclient.conf': No such file or directory
    Nov 14 01:49:39 [cardclient.core] created 0 client(s)
    Nov 14 01:49:39 [general.info] loading smartcard data from /etc/vdr/plugins/smartcard.conf
    Nov 14 01:49:39 [general.info] Using software decryption on card 1
    Nov 14 01:49:39 [general.info] Using software decryption on card 0
    Nov 14 01:49:39 [core.pids] 0: now tuned to source 8882 transponder 1b6e8
    Nov 14 01:49:44 [core.pids] 0: tune to same source/transponder


    vdr.err:
    vvdr: missing plugin '-v'


    syslog:
    Nov 15 02:54:21 arvdr vdr: [3525] WARN: missing plugin '-v'
    Nov 15 02:54:21 arvdr vdr: [3525] VDR version 1.4.7 started
    Nov 15 02:54:21 arvdr vdr: [3525] loading plugin: /usr/lib/vdr//libvdr-sc.so.1.4.5
    Nov 15 02:54:21 arvdr vdr: [3525] ERROR (smartcard.c,118): Input/output error
    Nov 15 02:54:21 arvdr vdr: [3525] ERROR (smartcard.c,119): Input/output error
    Nov 15 02:54:21 arvdr vdr: [3525] loading plugin: /usr/lib/vdr//libvdr-reelchannelscan.so.1.4.5
    Nov 15 02:54:21 arvdr vdr: [3525] loading plugin: /usr/lib/vdr//libvdr-streamdev-server.so.1.4.5
    Nov 15 02:54:22 arvdr vdr: [3525] loading plugin: /usr/lib/vdr//libvdr-network.so.1.4.5
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/setup.conf
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: DisableVPS = 0
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: DoubleEpgAction = 0
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: DoubleEpgTimeDelta = 15
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: JumpPlay = 0
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: LoadMarksInterval = 0
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: MixEpgAction = 0
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: PlayJump = 0
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: RecordDolbyDigital = 1
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: SortTimers = 1
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: sc.LoggerActive = 1
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: unknown config parameter: sc.LoggerTimeout = 0
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/sources.conf
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/diseqc.conf
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/channels.conf
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/timers.conf
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/commands.conf.rus
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/reccmds.conf.rus
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/svdrphosts.conf
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/remote.conf
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/keymacros.conf
    Nov 15 02:54:22 arvdr vdr: [3537] video directory scanner thread started (pid=3537, tid=3537)
    Nov 15 02:54:22 arvdr vdr: [3538] video directory scanner thread started (pid=3538, tid=3538)
    Nov 15 02:54:22 arvdr vdr: [3525] reading EPG data from /ramdisk/epg.data
    Nov 15 02:54:22 arvdr vdr: [3525] no DVB device found
    Nov 15 02:54:22 arvdr vdr: [3525] initializing plugin: sc (0.8.3): A software emulated CAM
    Nov 15 02:54:22 arvdr vdr: [3525] [general.info] SC version 0.8.3 initializing
    Nov 15 02:54:22 arvdr vdr: [3525] [general.debug] probing /dev/dvb/adapter0/frontend0
    Nov 15 02:54:22 arvdr vdr: [3525] [general.debug] capturing device 0
    Nov 15 02:54:22 arvdr vdr: [3540] tuner on device 1 thread started (pid=3540, tid=3540)
    Nov 15 02:54:22 arvdr vdr: [3541] section handler thread started (pid=3541, tid=3541)
    Nov 15 02:54:22 arvdr vdr: [3525] [general.debug] probing /dev/dvb/adapter1/frontend0
    Nov 15 02:54:22 arvdr vdr: [3525] [general.debug] capturing device 1
    Nov 15 02:54:22 arvdr vdr: [3543] tuner on device 2 thread started (pid=3543, tid=3543)
    Nov 15 02:54:22 arvdr vdr: [3544] section handler thread started (pid=3544, tid=3544)
    Nov 15 02:54:22 arvdr vdr: [3525] [general.debug] probing /dev/dvb/adapter2/frontend0
    Nov 15 02:54:22 arvdr vdr: [3525] [general.info] captured 2 video devices
    Nov 15 02:54:22 arvdr vdr: [3525] initializing plugin: reelchannelscan (0.4.3): Search Transponders for DVB Channels
    Nov 15 02:54:22 arvdr vdr: [3525] initializing plugin: streamdev-server (0.3.3-pre3-geni): VDR Streaming Server
    Nov 15 02:54:22 arvdr vdr: [3525] initializing plugin: network (0.0.1): Networksetup
    Nov 15 02:54:22 arvdr vdr: [3525] setting primary device to 1
    Nov 15 02:54:22 arvdr vdr: [3525] device 1 has no MPEG decoder
    Nov 15 02:54:22 arvdr vdr: [3525] SVDRP listening on port 2001
    Nov 15 02:54:22 arvdr vdr: [3537] video directory scanner thread ended (pid=3537, tid=3537)
    Nov 15 02:54:22 arvdr vdr: [3538] video directory scanner thread ended (pid=3538, tid=3538)
    Nov 15 02:54:22 arvdr vdr: [3525] skin "DeepBlue" not available - using "classic" instead
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/themes/classic-default.theme
    Nov 15 02:54:22 arvdr vdr: [3525] starting plugin: sc
    Nov 15 02:54:22 arvdr vdr: [3525] [general.info] SC version 0.8.3 starting
    Nov 15 02:54:22 arvdr vdr: [3525] [general.warn] ScCaps contains unusual value. Check your config! (You can ignore this message if you have more than 16 dvb cards in your system ;)
    Nov 15 02:54:22 arvdr vdr: [3525] [general.error] Failed to open file '/etc/vdr/plugins/SoftCam.Key': No such file or directory
    Nov 15 02:54:22 arvdr vdr: [3525] [general.error] no keys loaded for softcam!
    Nov 15 02:54:22 arvdr vdr: [3525] [general.error] Failed to open file '/etc/vdr/plugins/Viaccess.KID': No such file or directory
    Nov 15 02:54:22 arvdr vdr: [3525] [general.error] Failed to open file '/etc/vdr/plugins/Seca.KID': No such file or directory
    Nov 15 02:54:22 arvdr vdr: [3525] [general.error] Failed to open file '/etc/vdr/plugins/Ird-Beta.KID': No such file or directory
    Nov 15 02:54:22 arvdr vdr: [3525] [general.error] Failed to open file '/etc/vdr/plugins/cardclient.conf': No such file or directory
    Nov 15 02:54:22 arvdr vdr: [3545] SmartcardWatcher thread started (pid=3545, tid=3545)
    Nov 15 02:54:22 arvdr vdr: [3545] ERROR (smartcard.c,305): Input/output error
    Nov 15 02:54:22 arvdr vdr: [3525] [general.info] Using software decryption on card 1
    Nov 15 02:54:22 arvdr vdr: [3525] [general.info] Using software decryption on card 0
    Nov 15 02:54:22 arvdr vdr: [3525] starting plugin: reelchannelscan
    Nov 15 02:54:22 arvdr vdr: [3525] starting plugin: streamdev-server
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/plugins/streamdevhosts.conf
    Nov 15 02:54:22 arvdr vdr: [3546] streamdev server thread started (pid=3546, tid=3546)
    Nov 15 02:54:22 arvdr vdr: [3546] Streamdev: Listening (VTP) on port 2004
    Nov 15 02:54:22 arvdr vdr: [3546] Streamdev: Listening (HTTP) on port 3000
    Nov 15 02:54:22 arvdr vdr: [3525] starting plugin: network
    Nov 15 02:54:22 arvdr vdr: [3525] skin "DeepBlue" not available - using "classic" instead
    Nov 15 02:54:22 arvdr vdr: [3525] loading /etc/vdr/themes/classic-default.theme
    Nov 15 02:54:22 arvdr lircd 0.7.1pre2[3460]: accepted new client on /dev/lircd
    Nov 15 02:54:22 arvdr vdr: [3547] LIRC remote control thread started (pid=3547, tid=3547)
    Nov 15 02:54:22 arvdr vdr: [3548] KBD remote control thread started (pid=3548, tid=3548)
    Nov 15 02:54:22 arvdr vdr: [3525] remote control LIRC - keys known
    Nov 15 02:54:22 arvdr vdr: [3525] remote control KBD - keys known
    Nov 15 02:54:22 arvdr vdr: [3525] switching to channel 1
    Nov 15 02:54:22 arvdr vdr: [3525] setting watchdog timer to 900 seconds
    Nov 15 02:54:22 arvdr vdr: [3540] Sent DISEQC command: T V
    Nov 15 02:54:22 arvdr vdr: [3525] ERROR: no OSD provider available - using dummy OSD!
    Nov 15 02:54:22 arvdr vdr: [3545] ERROR (smartcard.c,305): Input/output error
    Nov 15 02:54:23 arvdr last message repeated 2 times

    Сообщение было отредактировано 3 раз, последнее редактирование пользователем creator2007 ().

  • arvdr:/var/log# cat /dev/ttyS0
    cat: /dev/ttyS0: Input/output error


    arvdr:/var/log# dmesg | grep tty
    console [tty0] enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A


    arvdr:/var/log# setserial -ag /dev/ttyS*
    /dev/ttyS0, Line 0, UART: unknown, Port: 0x03f8, IRQ: 4
    Baud_base: 115200, close_delay: 50, divisor: 0
    closing_wait: 3000
    Flags: spd_normal


    /dev/ttyS1, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3
    Baud_base: 115200, close_delay: 50, divisor: 0
    closing_wait: 3000
    Flags: spd_normal


    /dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4
    Baud_base: 115200, close_delay: 50, divisor: 0
    closing_wait: 3000
    Flags: spd_normal skip_test


    /dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3
    Baud_base: 115200, close_delay: 50, divisor: 0
    closing_wait: 3000
    Flags: spd_normal

    Сообщение было отредактировано 3 раз, последнее редактирование пользователем creator2007 ().

  • Никто ничего не скажет?
    Победил нежелание порта сотрудничать, теперь вот что vdr-sc говорит:


    Nov 15 22:20:09 [general.debug] logfile '/var/log/vdr-sc' opened
    Nov 15 22:20:09 [general.info] SC version 0.8.3 initializing
    Nov 15 22:20:09 [general.debug] probing /dev/dvb/adapter0/frontend0
    Nov 15 22:20:09 [general.debug] capturing device 0
    Nov 15 22:20:09 [general.debug] probing /dev/dvb/adapter1/frontend0
    Nov 15 22:20:09 [general.debug] capturing device 1
    Nov 15 22:20:09 [general.debug] probing /dev/dvb/adapter2/frontend0
    Nov 15 22:20:09 [general.info] captured 2 video devices
    Nov 15 22:20:09 [general.info] SC version 0.8.3 starting
    Nov 15 22:20:09 [core.load] ** Plugin config:
    Nov 15 22:20:09 [core.load] ** Key updates (AU) are enabled (active CAIDs)
    Nov 15 22:20:09 [core.load] ** Local systems DON'T take priority over cached remote
    Nov 15 22:20:09 [core.load] ** Concurrent FF recordings are NOT allowed
    Nov 15 22:20:09 [core.load] ** Force transfermode with digital audio
    Nov 15 22:20:09 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
    Nov 15 22:20:09 [core.load] ** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    Nov 15 22:20:09 [general.error] Failed to open file '/etc/vdr/plugins/SoftCam.Key': No such file or directory
    Nov 15 22:20:09 [core.load] loaded 0 keys from /etc/vdr/plugins/SoftCam.Key
    Nov 15 22:20:09 [general.error] no keys loaded for softcam!
    Nov 15 22:20:09 [core.load] ** registered systems:
    Nov 15 22:20:09 [core.load] ** Viaccess (pri -10)
    Nov 15 22:20:09 [core.load] ** @SHL (pri -10)
    Nov 15 22:20:09 [core.load] ** Seca (pri -10)
    Nov 15 22:20:09 [core.load] ** SC-Viaccess (pri -5)
    Nov 15 22:20:09 [core.load] ** SC-Seca (pri -5)
    Nov 15 22:20:09 [core.load] ** SC-Nagra (pri -5)
    Nov 15 22:20:09 [core.load] ** SC-Irdeto (pri -5)
    Nov 15 22:20:09 [core.load] ** SC-Cryptoworks (pri -5)
    Nov 15 22:20:09 [core.load] ** SC-Conax (pri -5)
    Nov 15 22:20:09 [core.load] ** Nagra (pri -10)
    Nov 15 22:20:09 [core.load] ** Nagra2 (pri -10)
    Nov 15 22:20:09 [core.load] ** Irdeto (pri -10)
    Nov 15 22:20:09 [core.load] ** Cryptoworks (pri -10)
    Nov 15 22:20:09 [core.load] ** ConstCW (pri -20)
    Nov 15 22:20:09 [core.load] ** Conax (pri -10)
    Nov 15 22:20:09 [core.load] ** Cardclient (pri -15)
    Nov 15 22:20:09 [general.error] Failed to open file '/etc/vdr/plugins/Viaccess.KID': No such file or directory
    Nov 15 22:20:09 [core.load] loaded 0 Viaccess cards from /etc/vdr/plugins/Viaccess.KID
    Nov 15 22:20:09 [general.error] Failed to open file '/etc/vdr/plugins/Seca.KID': No such file or directory
    Nov 15 22:20:09 [core.load] loaded 0 Seca cards from /etc/vdr/plugins/Seca.KID
    Nov 15 22:20:09 [general.error] Failed to open file '/etc/vdr/plugins/Ird-Beta.KID': No such file or directory
    Nov 15 22:20:09 [core.load] loaded 0 Irdeto cards from /etc/vdr/plugins/Ird-Beta.KID
    Nov 15 22:20:09 [general.info] loading cardclient config from /etc/vdr/plugins/cardclient.conf
    Nov 15 22:20:09 [cardclient.core] created 0 client(s)
    Nov 15 22:20:09 [general.error] Failed to open file '/etc/vdr/plugins/smartcard.conf': No such file or directory
    Nov 15 22:20:09 [core.serial] /dev/ttyS0: CAR is inactive (lines: DTR CAR)
    Nov 15 22:20:09 [general.info] Using software decryption on card 1
    Nov 15 22:20:09 [general.info] Using software decryption on card 0
    Nov 15 22:20:09 [core.pids] 0: now tuned to source 8882 transponder 1b6e8
    Nov 15 22:20:09 [core.serial] /dev/ttyS0: CAR is inactive (lines: DTR CAR)
    Nov 15 22:20:14 [core.serial] last message repeated 15 times
    Nov 15 22:20:14 [core.pids] 0: tune to same source/transponder
    Nov 15 22:20:14 [core.serial] /dev/ttyS0: CAR is inactive (lines: DTR CAR)
    Nov 15 22:20:26 [core.serial] last message repeated 37 times
    Nov 15 22:20:26 [core.pids] 0: tune to same source/transponder
    Nov 15 22:20:26 [core.serial] /dev/ttyS0: CAR is inactive (lines: DTR CAR)
    Nov 15 22:20:37 [core.serial] last message repeated 38 times
    Nov 15 22:20:37 [core.pids] 0: tune to same source/transponder
    Nov 15 22:20:38 [core.serial] /dev/ttyS0: CAR is inactive (lines: DTR CAR)
    Nov 15 22:21:07 [core.serial] last message repeated 96 times
    Nov 15 22:21:07 [core.serial] /dev/ttyS0: shutting down
    Nov 15 22:21:07 [core.serial] /dev/ttyS0: shutdown done
    Nov 15 22:21:07 [general.debug] SC cleanup done
    Nov 15 22:21:08 [core.dynamic] unload done

  • Прошу того, у кого работает оригинальная виа карта через феникс совместно с софт камом, показать настройки своего компорта к которому подключен феникс (вывод вот от такой команды: "setserial -aG /dev/ttyS0" если феникс на com1, и "setserial -aG /dev/ttyS1", если на com2 )

    Сообщение было отредактировано 1 раз, последнее редактирование пользователем creator2007 ().

  • Вроде как не видит игнала на линии DTR( Data Terminal Ready).
    Железо, так думаю, проверил?
    А ERROR (smartcard.c,305): Input/output error как поборол?
    У меня так-же ругается. Но пока не до Феникса.
    Причем на другом компе под Вынь с того-же программатора карта вина и АТР выдает на ресет...

  • Сначало нужно убедиться в правильной конфигурации setserial и что на порту ничего не висит (Lirc).
    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.


    Также, некоторым прагромматорам нужна "инверсия", поиграйтесь с этими параметрами:


    Исходный код
    1. -I --inverse-cd use inverse CD detection for the next serial device
    2. -R --inverse-rst use inverse RESET for the next serial device
  • Цитата

    Со слов пользователя aglow
    Вроде как не видит игнала на линии DTR( Data Terminal Ready).
    Железо, так думаю, проверил?
    А ERROR (smartcard.c,305): Input/output error как поборол?
    У меня так-же ругается. Но пока не до Феникса.
    Причем на другом компе под Вынь с того-же программатора карта вина и АТР выдает на ресет...


    ошибку победил установкой в конфиге компортов правильных параметров автоопределения: setserial -a /dev/ttyS0 uart 16550A

  • Цитата

    Со слов пользователя XAH
    раз бюджетка, тогда в sc нужно передать "-B N", где N - номер карточки (обычно 0).


    Сейчас попробую, отпишусь по завершению.

  • Цитата

    Со слов пользователя Bikalexander
    Сначало нужно убедиться в правильной конфигурации setserial и что на порту ничего не висит (Lirc).
    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.


    Также, некоторым прагромматорам нужна "инверсия", поиграйтесь с этими параметрами:


    Исходный код
    1. -I --inverse-cd use inverse CD detection for the next serial device
    2. -R --inverse-rst use inverse RESET for the next serial device


    Мой программатор имеет специальную перемычку смартмаус/феникс, то есть я аппаратно могу выбрать прямой у меня ресет или инверсный. Ставлю прямой, то есть феникс. Попробую сейчас еще СD программно инвертировать.

  • Изменил параметры sc.conf: PARAM="-I -B0 -s /dev/ttyS0"
    Логи поменялись, но не координально, каналы не открываются:

  • 1. Не свети в форуме ATR своей карты, а то будет тебе automatic tampax removal.


    2. Какой правильный ответ должен быть от карты? Что это за карта, наконец?