Thomson Grass Valley Edius

    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.




    EDIUS nonlinear editing software is designed for any broadcast and postproduction environments, especially those with newer, tapeless forms of video recording and storage. Perfect for file-based workflows, EDIUS software offers real-time, multi-track, mixed-format editing, compositing, chroma keying, titling, and timeline output capabilities. In addition to the standard formats of the EDIUS family, it supports Infinity™ JPEG 2000, DVCPRO, P2, VariCam, Ikegami GigaFlash, MXF, XDCAM, and XDCAM EX video. It also supports all DV and HDV cameras and decks.



    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.


    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.


    Minimum System Requirements


    EDIUS editing software is capable of editing both SD and HD content in real time, however the system requirements for real-time HD editing are significantly higher than for SD editing. The requirements shown here are for real-time HD editing.



    • Intel or AMD CPU with a 3 GHz processor speed or faster (multiple CPUs and/or multi-core CPUs are recommended. SSE2 and SSE3 instruction set supported)

    • 1 GB RAM (2 GB or more recommended)

    • 800 MB free disk space

    • DVD-ROM drive for software installation

    • ATA100/7200 rpm or faster hard disk, capable of sustaining at least 20 MB/sec data transfer. A RAID stripe set of two or more hard disk drives is required for multiple HD stream output

    • Graphics card with at least 256 MB of graphics memory (512 MB recommended) with support for PixelShader Model 3.0 or later(i.e. DX9-based)

    • One free 5.25-inch mounting bay (required if using the HDSTORM Bay)

    • Windows® XP Home or Windows® XP Professional (32-bit, Service Pack 2 or later), or Windows Vista (32-bit or 64-bit, Service Pack 1 or later)

    • One free USB (1.1 or higher) port for security key

    • Soundcard


    Download:. Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.


    Homepage:. Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.



    :..

    Filename: EDIUS5UPD_v512.zip
    Released: 06/19/2009
    Size: 96.9MB



    Цитата

    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.





    Instructions:


    Make sure EDIUS v5.10 is installed, and that your security dongle is inserted.


    Download EDIUS5UPD_v512.zip to your local harddisk drive
    Extract the EDIUS5UPD_v512.zip file into a specific folder (e.g. C:\DLFiles)
    Update EDIUS v5.10 by running the file SetupManagerForEDIUS.exe from the folder that you unpacked the package to.




    Fixed issues:


    Fixed issue with crash when using chroma key on 720p project.
    Fixed issue with crash when looping playback of clip with transition setting dialogue opened and then closing the dialogue.
    Fixed issue with crash when using transition to specify bitmap on the flip side of Effects such as Page Peel.
    Fixed issue with crash while playing certain MPEG (Program Stream) file.
    Fixed issue with crash while converting clip which is downloaded from XDCAM.
    Fixed issue with FIRECODER Blu not being recognized after updating EDIUS 5.1.
    Fixed issue with crash on Disc Burner if it has old Menu style file.
    Fixed issue with crash on Disc Burner when clicking cancel button to erase DVD-RW.
    Fixed issue with encoding clips when Auto is specified for encode settings.
    Disc Burner: Fixed issue with writing data to multiple DVD drives simultaneously.
    Disc Burner: Fixed issue with missing lip-sync in some materials and encoding when creating DVD disc.
    Disc Burner: Fixed issue with selecting frame rate in menu while creating BD.
    Disc Burner: Fixed issue with saving Volume Label.
    Disc Burner: Fixed issue with aspect ratio of menu not being automatically configured.
    Disc Burner: Fixed issue with output error being generated when creating work folder immediately beneath the root directory.
    Fixed issue with loading some WAV files.
    Fixed issue with recognizing alpha channel QuickTime file in which animation is compressed.
    Fixed issue with loading AVCHD file from JVC Everio "GZ-HD300/320" onto EDIUS.
    Fixed issue with being able to choose "Move rubberband points with percentage" when reference point of rubberband is 0%.
    Fixed issue with matching numbers for Rate to the ones for Duration when changing playback speed of clip.
    Fixed issue with updating link target for material while importing sequence file.
    Fixed issue with loading clip which is applied speed settings (fixed rate) while importing Final Cut Pro XML file.
    Fixed issue with reverting to the saved settings when a button to initialize video layout being pressed.
    Fixed issue with moving/stretching characters entered in Quick Titler when making mouse left-handed.
    Fixed issue with displaying border which is embedded in transition.
    Fixed issue with incorrect folder icon display when using effect palette.
    Fixed issue with displaying XDCAM EX Clip Browser in Tool Menu.
    Fixed issue with not being able to output file with the setting of 25/50 fps HD resolution when using Windows Media Export.
    Fixed issue with improper playback of frames followed by a frame which has broken data.
    Fixed issue with video and audio waveform not matching when changing frame rate.
    Fixed issue with playing certain MP4 files.
    Fixed issue with files converted to MPEG2 being rejected by third party's Certified System.
    Fixed issue with misalignment of Out point for a file which has been captured as M2t.
    Fixed issue with ignoring file extensions when restoring online clips.
    Fixed issue with failing to import still images when importing AAF files.
    Fixed issue with playing certain AVC-Intra50 P2 clips.
    Fixed issue with directly outputting files to PDW-HD1500 via XDCAM DV or XDCAM IMX Exporter.
    Fixed issue with displaying error message when failing to transfer clips from P2 select.



    На Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу. доступна триальная версия edius neo 2.5 booster, которая позволяет работать в реальном времени с тремя и более дорожками AVCHD на монтажной линейке, если система основана на новом поколении процессоров интеля серии i7.


    • Real-time Multi-Layer AVCHD Editing
    • Real-time, mixed-format, SD/HD editing, including DV, HDV, AVCHD, MPEG-2, Windows Media, and QuickTime video
    • Direct to Blu-ray disc and DVD timeline export with menus
    • Quick Titler software, for real-time titling, including rolls and crawls
    • Upgradeable to higher-end EDIUS software
    • Real-time SD/HD effects, keyers, transitions, and titles, including new GPUfx (GPU-accelerated transitions)
    • Supports Windows 7, Windows Vista, and Windows XP
    • Supports FIRECODER Blu for hardware-accelerated encoding of H.264 and MPEG-2
    • Supports HDSPARK for full-resolution HDMI monitoring
    • Image Stabilization Software Included
    • Additional transitions and video filters from proDAD

    • Fixed issue with drastically changing color when loading certain QuickTime movie (H.264) files
    • Fixed issue with lip-sync alignment when converting certain clips that had the frame rate changed
    • Fixed issue with error (access violation) when performing certain operations on Player window
    • Fixed issue with evaluating certain color space when using vectorscope / waveform
    • Fixed issue with region filter where the rendering got cancelled in areas where the filter is not applied
    • Fixed issue with timeline operation when clicking the monitor window while changing the border color in 2D transitions
    • Fixed issue with stopping MPEG conversion while batch exporting
    • Fixed issue with bitrate being set to 0.0 Mbps under certain conditions when using Disc Burner
    • Fixed issue with writing data to BD-R when using Disc Burner with Pioneer BDR-S05
    • Fixed issue with sync alignment of video and audio in certain files imported with K2 Connect
    • Fixed issue with loading certain GXF files with K2 Connect
    • Fixed issue with placing certain files on the timeline when loading MXF files with K2 Connect
    • Fixed issue with access violation when updating overlay
    • Fixed issue with the display settings of the timecode being ignored when outputting MXF files via XRE



    Цитата

    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.
    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.


    [Fixed issues]
    Fixed issue of crash of EDIUS when AES collaboration is performed.
    Fixed issue of clip which is captured by GF Ingest being converted to offline clip.
    Fixed issue of time code display being set to start time code of sequence when outputting clip in AAF format.
    Fixed issue of crash when exporting file in MXF format.
    Fixed issue of color change when loading CANON EOS Movie file. ;)
    Improved performance when handling large amount of clips on K2 Connect.
    Fixed issue of crash when converting specific files.

    Сообщение было отредактировано 1 раз, последнее редактирование пользователем тутанхамон ().

    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.,


    Пожалуйста зарегистрируйся для просмотра данной ссылки на страницу.

    [New Features]
    ◦Added support for loading MXF file on SxS card which was recorded by SONY PMW-500.
    ◦Added support for playlist which was output to FTP/HDD(USB) using PLAY LIST EXPORT of AJ-HPM200.
    ◦Added support for timecode acquisition from Picture timing SEI.
    ◦Added support for H.264 hardware encoding utilizing Intel GPU.


    [Fixed issues]
    ◦Fixed issue with FA round Gothic TV-b font being crashed in QuickTitler.
    ◦Fixed issue with end timecode of clip thumbnail on source browser displayed being off by one frame.
    ◦Fixed issue with transition between clips being cancelled when performing trim operation with Alt + N/M on timeline.
    ◦Fixed issue with being unable to play back specific MP4 file properly.
    ◦Fixed issue with distorted video when playing back movie in H.264 60p which was shot by Panasonic TM750.
    ◦Fixed issue with crash of EDIUS when specific operation is performed while editing shape with mask filter.
    ◦Fixes issue with being unablel to import specific effect preset file created with EDIUS Pro 5.
    ◦Fixed issue with crash of EDIUS by mouse wheel operations when playing back still image on player.
    ◦Fixed issue with clip on timeline not being grouped.
    ◦Fixed issue with distorted video in the disc created by Disc Burner.
    ◦Fixed issue with being unable to play HQ/HQX file in Windows Media Player when OS is Windows vista 64bit.
    ◦Fixed issue with being unable to change IRE of DV hardware settings to 7.5 in HD project.
    ◦Fixed issue with crash of EDIUS when thumbnail shows specific XDCAM clip on source browser.
    ◦Fixed issue with effect not being reflected when altering the settings of 3DPinP
    ◦Fixed issue with backgournd video of motion menu not being displayed on DiscBurner.
    ◦Fixed issue with created DVD chapter menu not being displayed properly if style without thumbnail is selected when creating DVD by Disc Burner.
    ◦Fixed issue with thumbnail and/or cursor not being displayed properly when creating BD with menu by Disc Burner.
    ◦Fixed issue with error depending on chapter and In/Out position when creating DVD using Disc Burner.
    ◦Fixed issue with not recceiving sound of DVD menu which was created when video with audio was specified for motion menu to create DVD using Disc Burner.
    ◦Fixed issue with distorted video when converting it in alpha matte.
    ◦Fixed issue with crash of EDIUS when file is output after installing Sorenson Squeeze 6.5.
    ◦Fixed issue with noise being displayed when applying layouter and mixer track to specific still image file.
    ◦Fixed issue with crash of EDIUS when clip applied to a specific mask filter is scrubbed on timeline.
    ◦Fixed issue with being unable to load specific PSD file properly.
    ◦Fixed issue with being unable to play back Canopus HQ clip captured by EDIUS Pro in Windows Media player on the environment where EDIUS is installed.
    ◦Fixed issue with crash of EDIUS when placing P2 AVCIntra clip on timeline and exporting it in P2 DVCPROHD format.
    ◦Fixed issue with being unable to transfer animation created by TitleMotionPro.
    ◦Fixed issue with unused file not being deleted when executing Consolidate.
    ◦Fixed issue with error message not being shown even if failing to perform file delete from context menu against clip registered in Bin.
    ◦Fixed issue with crash of EDIUS when playing back sequence clip after applying speed-change of time effect to the sequence clip.
    ◦Fixed issue with crash of EDIUS when appplying time remap to sequence clip.
    ◦Fixed issue with [Pinning/Line/Bezier] in context menu of key frame not working.
    ◦Fixed localizing display in multilingual environment.